D-Link DAP-3711 User Manual page 33

Section 3 - Configuration
Advanced
In this section, you can configure settings such
Settings:
as static routes. In general, users will not need to
configure anything in this section.
Bridge
This displays and controls the DAP-3711's bridge
Interface
policy.
Setting:
VLAN:
This displays the DAP-3711 VLAN ID tag.
Ethernet
Use this to select the LAN port's speed negotiation
Interface
mode.
Setting:
IPv4/IPv6
Use this to add the Static Route rule for the DAP-
Static Route:
3711.
Interface
After enabling this function, the two wired
Isolation:
interfaces of the device cannot ping each other
D-Link DAP-3711 User Manual 33