Download Print this page
Technaxx TX-106 User Manual

Technaxx TX-106 User Manual

Hd outdoor camera with led lamp
Hide thumbs Also See for TX-106:

Advertisement

Quick Links

HD Outdoor Camera with LED Lamp TX-106
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar "Konformitätserklärung"). Before using the
device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. Also ensure that
the mounting place is strong enough to hold this heavy device. When working
at higher altitudes, there is danger of falling! Therefore, use suitable
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Enjoy your product. Share your experience and opinion on one of the
Features
⚫ Multi functional: video recording with sound, photo, light
⚫ PIR motion detection of 60° angle up to ~7m (open areas)
⚫ PIR trigger time 1–1.5 seconds
⚫ Light in high brightness of 150 lumen (2W) up to ~8m distance
(open areas) & luminous time ~20 seconds
⚫ Alarm at low battery by LED indicator light
⚫ Stand alone device powered by batteries
⚫ Wall mounting (360° rotation, 180° up/down)
⚫ Many other mounting possibilities e.g. in the garden with the
ground mounting holder
⚫ Protection class IP65 (dust & waterproof)
®
Technaxx
Free Email: support@technaxx.de
safeguards.
well-known internet portals.
* User Manual
1
Warranty 2 years

Advertisement

loading
Need help?

Need help?

Do you have a question about the TX-106 and is the answer not in the manual?

Questions and answers

Summary of Contents for Technaxx TX-106

  • Page 1 ® Technaxx * User Manual HD Outdoor Camera with LED Lamp TX-106 The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device the first time, read the user manual carefully.
  • Page 2 4.5V (LED is blinking in red) –10°C up to +40°C Operation temperature Weight / Dimensions 400g / (L) 19.5 x (W) 15.0 (H) 10.5 cm HD Outdoor camera with LED lamp TX-106, 1x Package Ground mounting holder, 3x Screws with dowels, Contents User Manual Note: These parts are needed to operate but are not included.
  • Page 3 Product overview PIR (motion detection) LED light Microphone Angle adjustment Camera Mounting base thumb Status LED (red / green) Mounting base How to use the camera Remove front cover rotating counter-clockwise → picture A.1 and A.2. Open the lock → picture B.1. →...
  • Page 4 Insert a MicroSD card into the MicroSD card slot (C.1) → close the battery compartment and then the lock. → slide the switch to your desired setting (Video / Photo / Light / Off → see chapter Mode Settings) Correct the time, see chapter “How to set time and date”.
  • Page 5 Replace the front cover by turning. Important: The arrows must match when closed. → When closed, the camera is waterproof to IP65. Put the head back on the basis → tighten the screw 2 Loosen the screw 1 (little by little) →...
  • Page 6 Mode settings Video Mode Photo Mode Only Light Mode 1 = Micro USB port 2 = Mode Switch Note: Use only new alkaline D-Cell batteries with 1.5V rating. Do not mix old and new batteries. Install batteries with polarity in correct position. (a) Video Mode Switch the mode switch to VIDEO.
  • Page 7: Set Time And Date

    (b) Photo Mode Switch the mode switch to PHOTO. The green status LED flashes as soon as motion detection (PIR) is triggered. Photos are stored on the inserted MicroSD card. Stop taking photos after 20 seconds when there is no more movement. If during 20 seconds there is still movement the camera will continue taking photos.
  • Page 8 6. Then click the button “SET time” to finish time setting. 7. Eject the removable disk. And then disconnect the USB connection between TX-106 and PC. Then slide the switch to the desired mode. Watch videos To watch recorded videos on your PC, insert the MicroSD card directly into the MicroSD card slot of your PC.
  • Page 9 PIR detecting range Remark: The PIR detection area is 60°. Moreover, the PIR detection range is affected by the environment temperature (25°C is the best temperature). Ground Mounting holder With the ground mounting holder* (*included) you can you use the device as path light with camera or as path light in your garden.
  • Page 10 ⚫ Only use accessories as recommended in this manual. ⚫ TECHNAXX recommends using 4 pieces of D-Size Alkaline batteries of very high standard, this product can model to obtain maximum battery life (do not mix old and new batteries).
  • Page 11 US Warranty Thank you for your interest in the products and services of Technaxx Deutschland GmbH & Co.KG. This Limited Warranty applies to physical goods, and only for physical goods, purchased from Technaxx Deutschland GmbH & Co.KG.

This manual is also suitable for:

47584757