Summary of Contents for Style selections 978840204
Page 1
ITEM/ARTICLE/ARTÍCULO #0125466/0220274/0220279/ 0220313/0234080/0066827 VINYL VERTICAL BLINDS STORES VERTICAUX EN VINYLE PERSIANAS VERTICALES DE VINILO MODEL/MODÈLE/MODELO #978840204/978840407/978840507/ 978840106/978840305/978840608 Questions/Des questions/¿Preguntas? Call customer service at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday. Appelez notre service à la clientèle au 1 877 888-8225, entre 8 h et 20 h (HNE), du lundi au vendredi.
Page 2
HARDWARE CONTENTS/QUINCAILLERIE INCLUSE/ADITAMENTOS Valance Clips Mounting Brackets Attaches de cantonnière Supports de fixation Sujetadores de la cenefa Abrazaderas de montaje Valance Corners Mounting Screws Wall Anchors Coins de cantonnière Vis de montage Chevilles d'ancrage Esquinas de la cenefa Tornillos de montaje Anclas de expansión de pared PREPARATION/PRÉPARATION/PREPARACIÓN Before beginning installation of product, make sure all parts are present.
Page 3
ASSEMBLY INSTRUCTIONS/INSTRUCTIONS POUR L’ASSEMBLAGE/INSTRUCCIONES DE ENSAMBLAJE 1. Position Blinds Inside Mount: Place a light pencil mark on the front of the 7 in. 7 in. Outside Mount: Measure headrail (A) 7 in. in from each 84-1/2 in. from the floor at end.
Page 4
Inside Mount: Remove 4. Install Louvers preassembled metal clip from mounting bracket (CC). Only Insert louvers (E) in open the metal clip will be used for position. Hold the louver (E) securely at the top and the inside mount method. Align gently push upward into the front of the metal clip with the carriage until it snaps into...
Page 5
OPERATING INSTRUCTIONS/MODE D’EMPLOI/INSTRUCCIONES DE FUNCIONAMIENTO To tilt louvers (E): Attach wand (B) plastic clip at the end of the blind. Rotate the wand (B) until louvers (E) are in desired position. If louvers (E) become misaligned, simply turn the louver stems in place by hand. To open and close blind: Use the wand (B) to traverse the louvers (E) to the desired position.
Need help?
Do you have a question about the 978840204 and is the answer not in the manual?
Questions and answers