Easy Installation; Switching Between Fahrenheit And Celsius; Instructions For Use - 4MOMS Spout Cover Manual

English

EASY INSTALLATION

1. Affix the Spout Cover
securely to bathtub spout using
™
the hook and loop strap.
2.
Turn on the water and make sure the running water is
making contact with the Water Temperature Sensor.
3. On many bath tub spouts, the Spout Cover
will cover the entire spout. On others, it will not. Safe
and proper use is still possible, as long as running water
is making constant contact with the Water Temperature
Sensor at the bottom of the Spout Cover
6
™
.
™

SWITCHING BETWEEN FAHRENHEIT AND CELSIUS

Make sure that the temperature screen is turned off.
Press and hold the power button for approximately
15 seconds.
The screen should flash and beep, and then reappear
in the alternate temperature scale.
To turn back, repeat this process.

INSTRUCTIONS FOR USE

1.
Begin running water into bathtub with
Spout Cover firmly affixed to bathtub spout.
™
2.
Turn product on by pressing the On/Off button.
3.
Observe LCD for current water temperature.
4. Adjust hot/cold faucet handles until comfortable water
temperature is achieved (backlight should be green).
5.
Fill the bathtub to an appropriate level,
and turn off the water.
6.
Check bath temperature with hands before placing
child into the tub.
7. The LCD will turn off automatically if no water flow is detect-
ed for 15 minutes. You can manually turn off the display by
pressing the On/Off button.
English
7