Sytech Easy Talk Series Manual page 16

Desktop caller id telephone with handsfree function
Table of Contents

Advertisement

Available languages

Available languages

Redial function
1.
Pick up the handset or press
Press REDIAL/P key for the last dialled number to be dialled again.
2.
Pre-dial function
1.
In on-hook state
Dial the desired number, if any mistake press DEL/MUTE key to edit.
2.
3.
Pick up the handset or press
REVIEWING INCOMING AND OUTGOING CALL NUMBERS
Reviewing incoming call number
While on on-hook or off-hook state, press the UP/+ or DOWN/- key to review incoming call numbers one by
one. After all incoming call numbers are reviewed, the LCD will display: ---END OF LIST---,
Reviewing outgoing call number
While on on-hook or off-hook state, press OUT/× key to review the outgoing call numbers and
1.
conversation time from the last to the first calls. While reviewing, press the UP/+ key to check outgoing
calls above.
2.
Once all the outgoing call numbers are reviewed, the LCD will display:
3. If you wish to delete a number, press the DEL/MUTE key once. The LCD will display DEL. Press the
DEL/MUTE key again to confirm and delete the number. To delete all the numbers, press and hold DEL/MUTE
key for 3 seconds. The LCD will display DEL ALL? .Press the DEL/MUTE key to confirm and all numbers will
be deleted.
CALLING BACK INCOMING AND OUTGOING NUMBERS
Calling back incoming call numbers
1.
While on on-hook state, review incoming call numbers to find a desired number.
key, BACK/HOLD key or pick up the handset, to dial out the number.
2.
Press
Otherwise, press BACK/HOLD key twice and it dials out along with the long distance code.
3.
4. If a PABX code has been set in advance, and the number is of 7-digits or more, it is dialled out along with
the PABX code;
5. Otherwise, press BACK/HOLD key twice to dial out along with PABX code, pause time and long distance
code.
Calling back outgoing call numbers
1.
In on-hook state, review outgoing call number to find a desired number,
key, BACK/HOLD key or pick up the handset, to dial out the number.
2.
Press
Otherwise in off-hook state, review and find a desired outgoing number and press BACK/HOLD key to
3.
dial it the number.
key,
key to dial out the number.
16
---END OF LIST---,

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Easy Talk Series and is the answer not in the manual?

This manual is also suitable for:

Sy-1490

Table of Contents