Do you have a question about the Sentinel and is the answer not in the manual?
Questions and answers
Summary of Contents for Triple E Sentinel
Page 1
Sentinel Door Replacement Guide Triple E Technologies, LLC Version 08-100-008.01 Triple E Technologies, LLC P.O. Box 2677 Post Falls, ID 83877 Phone: 208.777.9300 | Fax: 208.777.9304...
Page 2
Triple E Technologies, LLC. The information in this document is subject to change without notice. Although Triple E Technologies, LLC has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions.
Page 3
Sentinel Door Replacement Guide Table of Contents Overview Supplied Components Additional Required Components Parts Identification Removal Replacement...
Page 4
Sentinel Door Replacement Guide Overview This guide details the steps for replacing a door on a Sentinel island card reader. Supplied Components (1) Replacement door (1) Silicone gel packet (1) Matrix Orbital 9-PIN RS232 data cable ...
Page 5
Noritake/Itron screen and from from the power strip and set aside. the Sentinel computer, then set aside. *This component will be mailed back to Triple E. *This component will be mailed back to Triple E. Removal Page 2...
Page 6
Sentinel Door Replacement Guide Use a screwdriver to remove all 6 Phillips- Gently remove the door and hinge from head machine screws from top door hinge Sentinel body. and set aside. *The silicone weather sealant will provide significant resistance - a small pry bar or other prying tool may be required.
Page 7
Sentinel Door Replacement Guide Replacement Apply new silicone to the Sentinel door hinge Mount the replacement door by using the mounting surface. previously removed Phillips-head machine screws. Attach the door loosely and align to ensure it is centered in the opening, then tighten down all 6 screws to keep the door in place.
Page 8
Sentinel Door Replacement Guide Plug the Matrix Orbital 9-PIN RS232 data Plug the Matrix Orbital USB power cable into cable into COM2 on the Sentinel computer. an available blue USB 3.0 port on the Sentinel computer. Turn the power strip back on and power up Call Triple E Customer Support at (888) 407- the system.
Need help?
Do you have a question about the Sentinel and is the answer not in the manual?
Questions and answers