Honeywell INTEVIO User Manual page 75


Dry Contact Input
If the dry contact inputs are connected to third-party devices, the transmission line can be
supervised. This function can be configurable. If supervision is enabled, two 10k resistors
should be connected to each dry contact output of the third-party device. Please refer to
Connecting Contact Input
5． Groups
Each group contains some speaker lines and users can configure groups via the software. The
interface is displayed as below:

Device List & Speaker Line List
Device List displays all controllers that are connected to loudspeaker lines. Select one device
and the speaker line list will display the connected lines.

Group List
Users need to create a group first. Click the icon
displayed:
Enter the group name and click OK to create a new group.
Select a group in the group list and click the
below. Users can enter the group name as follows:
In the group list, select a group and click the
Right clicking in the group list offers the options to add, rename and delete a group.
for related information.
icon or double click to open the window shown
icon to delete the group.
in the group list and the window below is
67