Download Print this page
Champion Sports SG3IN1 Quick Start Manual

Champion Sports SG3IN1 Quick Start Manual

3 in 1 soccer training goal

Advertisement

Quick Links

Features:
• Soccer goal, rebounder, and target all-in-one
• Heavy-duty, weather-resistant 1.25" powder-coated 6' x 4' frame
• Easy-push button assembly
• 4'x4' Polyethylene net with self stick hanging loops
• Includes bungee cord, rebounder, and targets for multiple uses
• Adjustable clamps for multiple rebound angles
• 6' x 3' x 4'
Instructions:
ASSEMBLING THE FRAME -
1. Insert pole #1 into the end of pole #2 and press together until
the pushbutton snaps into place. Repeat step 1 for the
remaining # 1 and 2 poles.
2. Insert pole #6 into each open end of the #1-2 section already
assembled. Make sure the poles line up.
3. Insert pole #4 into pole #5 and press together until it snaps into place.
4. Align the hole in the flat end of pole #3 with the hole in pole #6 and the hole at the end of pole #4. Insert
screw #10 with washer into the aligned holes and tighten just enough to allow pole #3 to pivot. Repeat
aligning poles #3, #6 and #5. This completes the base section.
5. Press the tilt lock collar #9 onto the pole. Align the hole in the flat end of pole #8 with the hole in pole #2.
Place one washer onto screw #9 and insert it through.
6. Press the tilt lock collars #9 onto the #8 poles. Make sure the lever on the tilt lock collar #9 is in the open
position and insert one pole #7 into the tilt lock collar on each pole. Adjust the length of both #7-8 poles to
the same length. Rotate the #7 poles parallel to each other, and close the tilt lock collars.
7. With an assistant, raise the #3-1-2-3 section to a vertical position while aligning the holes in the flat ends of
the #7 poles with the holes in the #1 and #2 poles. Place washer onto screw and insert through the hole in
pole #1. Place washer and wing nut onto protruding screw and tighten just enough to allow pole #7 to
pivot. Repeat step 1, 2 & 3 for pole #2 at the opposite side.
Refer to parts illustrations to
help identify pole sections and sizes.
1-37" Long 2 pcs
2-37" Long 2 pcs
3-42" Long 2 pcs
4-37" Long 1 pc
11-Screws
10-Screws
4 pcs
2 pcs
18-Ground
14-Bungees
Stakes
30 pcs
4 pcs
19-Self-Stick
Fasteners
30 pcs
16-
Target
Net
Champion Sports • One Champion Way • Marlboro, NJ • 07746-0368 • 888-980-1200
5-36.5" Long 1 pc
6-21.5" Long 2 pcs
7-19" Long 2 pcs
8-23.5" Long 2 pcs
12-Washers
12 pcs
9-Tilt Lock
Collar 2 pcs
13-Wing
Nuts 6 pcs
15-
Rebounder
Net
17-
Goal Net
Shape may
Vary
SG3IN1
3 IN 1 SOCCER
TRAINING GOAL
Continued instructions on reverse side.

Advertisement

loading

Summary of Contents for Champion Sports SG3IN1

  • Page 1 Collar 2 pcs 14-Bungees 13-Wing Stakes 30 pcs 4 pcs Nuts 6 pcs 19-Self-Stick Fasteners Rebounder 30 pcs Goal Net Target Shape may Vary Continued instructions on reverse side. Champion Sports • One Champion Way • Marlboro, NJ • 07746-0368 • 888-980-1200...
  • Page 2 • When properly assembled and sued as intended, this rebounder is designed to provide many hours of playing enjoyment. Champion Sports • One Champion Way • Marlboro, NJ • 07746-0368 • 888-980-1200...