Schon 67065-0101 Use And Care Manual page 6

Installation (continued)
5
Installing the soap dispenser
□
Insert the body assembly (J) through the
selected hole in the sink. Secure the body
assembly to the sink with the nut (K).
□
From under the sink, screw the bottle (L) onto
the body assembly (J) shank.
J
K
L
6
Making the waterline
connections
NOTE: The hot side inlet tube is indicated by a label.
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
1
3
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.
6
2