Summary of Contents for Art's Way JR50
- Page 1 Art’s-Way Manufacturing Co., Inc. Model JR50 & JR75 Compact Grinder Mixer Illustrated Parts List 642550 Issued June 2018...
- Page 2 This symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS IN- VOLVED. The message that follows the symbol contains important information about your safety. Carefully read the message. Make sure you fully understand the causes of possible injury or death. IF THIS MACHINE IS USED BY AN EMPLOYEE, IS LOANED, OR IS RENTED, MAKE SURE THAT THE OPERATOR UNDERSTANDS THE TWO INSTRUCTIONS BELOW.
-
Page 3: To The Owner
This manual contains operating instructions for your JR50 & JR75 Compact Grinder Mixer only. Any mention of other machinery in this manual other than the JR50 & JR75 Compact Grinder Mixer is for reference only. This manual does not replace nor is it to be used for any machinery that may be attached to or used in conjunction with the JR50 &... -
Page 4: Parts & Service
PARTS & SERVICE PARTS & SERVICE As the purchaser of your new grinder mixer, it is very important to consider the following factors: A. Original Quality B. Availability of Service Parts C. Availability of Adequate Service Facilities Art’s-Way Manufacturing Co., Inc. has an excellent dealership network ready to answer any questions you may have about your grinder mixer. -
Page 5: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS TO THE OWNER SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE Art’s-Way Manufacturing Co., Inc. STATEMENT OF PRODUCT LIABILITY IMPORTANT WARRANTY INFORMATION LIMITATIONS OF THIS MANUAL PARTS & SERVICE TABLE OF CONTENTS LIMITED WARRANTY SAFETY FIRST NOTICES OF DANGER, WARNING, AND CAUTION Safety Instructions... -
Page 6: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS NAME PAGE HITCH ASSEMBLY MIX MILL & AUGER ASSEMBLY WINDOWS & ETC. ASSEMBLY HAMMERMILL OUTER ASSEMBLY MILL MIX DRIVE ASSEMBLY FRONT SHIELD ASSEMBLY AIR SYSTEM ASSEMBLY HYDRAULIC ASSEMBLY DISCHARGE ELBOW ASSEMBLY DISCHARGE SWING ASSEMBLY DISCHARGE HOOD ASSEMBLY SHIELDS &... - Page 7 TABLE OF CONTENTS Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
-
Page 8: Limited Warranty
LIMITED WARRANTY SEE OPERATORS MANUAL WARRANTY INFORMATION Manual No. 642550 Art’s-Way Manufacturing Co., Inc. -
Page 9: Safety First
Art’s-Way Manufacturing Co., Inc. strives to make our equipment as safe as possible. The Note: Contains additional information important Art’s-Way JR50 & JR75 Compact Grinder Mixer to a procedure and will be found within the conforms to applicable safety standards at the time regular text body of this manual. -
Page 10: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS GENERAL Safety Alert Symbols This is the safety alert symbol. It Most work related accidents are caused is used to alert you to potential by failure to observe basic safety rules personal injury hazards. Obey all or precautions. -
Page 11: Before Operating
SAFETY INSTRUCTIONS BEFORE OPERATING Keep all shields and guards in place and in good working condition. SAFETY INSTRUCTIONS Keep all bystanders, especially children, away from the grinder mixer while in Do not wear loose fitting clothing as it may operation. catch in moving parts. -
Page 12: Hydraulic Safety
SAFETY INSTRUCTIONS HYDRAULIC SAFETY Make sure the Slow Moving Vehicle (SMV) emblem and all lights and reflectors required by local highway and transportation SAFETY authorities are properly in place, clean, and INSTRUCTIONS clearly visible to traffic. Follow all operating, maintenance, and safety instructions found in this Manu- Do not allow riders on any machinery during transport. -
Page 13: Tire Safety
SAFETY INSTRUCTIONS TIRE SAFETY ASSEMBLY SAFETY SAFETY SAFETY INSTRUCTIONS INSTRUCTIONS Follow all operating and safety instruc- Follow all assembly, operating, and tions found in this manual when work- safety instructions found in this manu- ing around tires. al when assembly this equipment. Have only a qualified tire dealer or tire Use adequate manpower to perform repair service perform tire repairs. - Page 14 SAFETY INSTRUCTIONS THIS PAGE LEFT INTENTIONALLY BLANK Manual No. 642550 Art’s-Way Manufacturing Co., Inc.
- Page 15 SECTION 1: ILLUSTRATED PARTS LIST SECTION 1: ILLUSTRATED PARTS LIST Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
-
Page 16: Hitch Assembly
SECTION 1: ILLUSTRATED PARTS LIST HITCH ASSEMBLY SIMILAR PART(S): 12/19 NEW RELEASE ON SOLIDWORKS DESCRIPTION APPR REVISIONS NOTE: DO NOT SCALE MODEL UNLESS OTHERWISE SP EXCEPT AS MAY BE OTHERWISE PROVIDED BY DIMENSIONS ARE IN IN CONTRACT. THESE DRAWINGS AND SPECIFI- CATIONS ARE THE PROPERTY OF ARTS-WAY ONE PLACE (.X) - Page 17 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 018716 WHEEL, 15"X8" 020730 NUT, LUG 164420 STEM, VALVE 626050 JACK ASSY, SIDEWINDER I1980928C1 TIRE, 9.5L-15 8 PLY V63037 WHEEL/TIRE ASSY Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
-
Page 18: Mix Mill & Auger Assembly
SECTION 1: ILLUSTRATED PARTS LIST MIX MILL & AUGER ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 19 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 006880 BOLT, HHCS 5/16-18X5/8 012410 BOLT, CRG 5/16-18X3/4 019150 FLG, 1-1/8 BRG 020190 NUT, LOCK 5/16-18 FLG 020700 COTTER PIN, 3/16 X 2 1/2 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD 021240 SCREW, THMS 1/4-20...
-
Page 20: Windows & Etc. Assembly
SECTION 1: ILLUSTRATED PARTS LIST WINDOWS & ETC. ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 21 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 006880 BOLT, HHCS 5/16-18X5/8 012410 BOLT, CRG 5/16-18X3/4 019150 FLG, 1-1/8 BRG 020190 NUT, LOCK 5/16-18 FLG 020700 COTTER PIN, 3/16 X 2 1/2 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD 021240 SCREW, THMS 1/4-20...
-
Page 22: Hammermill Outer Assembly
SECTION 1: ILLUSTRATED PARTS LIST HAMMERMILL OUTER ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 23 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005360 NUT, HEX 1/2-13 009790 NUT, WING 5/16-18 009800 BOLT, HHCS 5/16-18 X 2 1/2 012410 BOLT, CRG 5/16-18X3/4 013080 SPRING, COMP. 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD 022920 WASHER, FLAT 5/16 STD 023060...
-
Page 24: Mill Mix Drive Assembly
SECTION 1: ILLUSTRATED PARTS LIST MILL MIX DRIVE ASSEMBLY *AS NEEDED* ITEM PART NUMBER 005360 005370 020260 020760 021860 022920 384570 528960 604150 JN10212 SIMILAR PART(S): MP903921 12/19/17 NEW RELEASE ON SOLIDWORKS DESCRIPTION APPR DATE E.C.N. SCALE REVISIONS *SOME COMPONENTS DRAWN MODEL NOTE: DO NOT SCALE... - Page 25 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 020260 SPROCKET, 40A18 IDLER 020760 KEY, SQUARE 5/16 X 1-1/8 021860 SPROCKET, 40B24 022920 WASHER, FLAT 5/16 STD 384570 CHAIN, ROLLER RC40 528960 SHIELD WLDT, 604150...
-
Page 26: Front Shield Assembly
SECTION 1: ILLUSTRATED PARTS LIST FRONT SHIELD ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 27 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD 027260 NUT, HEX 3/8-16 GR5 030470 BOLT, CRG 1/2-13 X 1-1/4" 116820 PIN, COTTER 1/16 X 3/4 170530...
-
Page 28: Air System Assembly
SECTION 1: ILLUSTRATED PARTS LIST AIR SYSTEM ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 29 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. JR50 QTY. JR75 012270 WASHER, FLAT 020190 NUT, LOCK 5/16-18 FLG 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD 032370 NUT, HEX 3/8-16 170530 BOLT, CRG 3/8-16 X 1"...
-
Page 30: Hydraulic Assembly
SECTION 1: ILLUSTRATED PARTS LIST HYDRAULIC ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 31 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 530050P HOSE, HYD 1/2"-130" -8FJIC X -10MORB 530340 VALVE, CHECK -10 ORB 551540 HOSE, HYD 1/2"-65" -8FJIC X -8FJIC 576100 COUPLER, HYD -10FORB 594840 FITTING, HYD XL 90°-8MFIC X -10MORB MP32.01952 FITTING, HYD STR -8MJIC X -8MJIC MP32.02101...
-
Page 32: Discharge Elbow Assembly
SECTION 1: ILLUSTRATED PARTS LIST DISCHARGE ELBOW ASSEMBLY 611190 SHIMS ARE AS REQUIRED IN PAIRS SIMILA 020880 & 020910 ARE AS REQUIRED EXCEPT AS M CONTRACT. CATIONS ARE MFG. CO., AR AND SHALL N OR USED AS OR SALE OF Manual No. - Page 33 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 010730 BOLT, HHCS 1/2-13 X 1-1/4" 012260 BOLT, HHCS 3/8-16 X 1 012270 WASHER, FLAT 019150 FLG, 1-1/8 BRG 020220 KEY, SQUARE 5/16 X 1-1/4...
-
Page 34: Discharge Swing Assembly
SECTION 1: ILLUSTRATED PARTS LIST DISCHARGE SWING ASSEMBLY SOME COMP FOR CLARIFIC ITEM NO. SIMILAR PART(S): 12/19/ NEW RELEASE ON SOLIDWORKS DESCRIPTION APPR DATE REVISIONS MODEL NOTE: DO NOT SCALE UNLESS OTHERWISE SP EXCEPT AS MAY BE OTHERWISE PROVIDED BY DIMENSIONS ARE IN IN CONTRACT. - Page 35 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 005900 BOLT, HHCS 5/16-18 X 1" 012260 BOLT, HHCS 3/8-16 X 1 013750 BEARING, BALL 021180 WASHER, LOCK 3/8 021190 WASHER, FLAT 3/8 STD...
-
Page 36: Discharge Hood Assembly
SECTION 1: ILLUSTRATED PARTS LIST DISCHARGE HOOD ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 37 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 006880 BOLT, HHCS 5/16-18X5/8 010730 BOLT, HHCS 1/2-13 X 1-1/4" 012260 BOLT, HHCS 3/8-16 X 1 022920 WASHER, FLAT 5/16 STD 023260 WASHER, FLAT 1/4 STD 023620...
-
Page 38: Shields & Additional Parts Assembbly
SECTION 1: ILLUSTRATED PARTS LIST SHIELDS & ADDITIONAL PARTS ASSEMBBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 39 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 009790 NUT, WING 5/16-18 010730 BOLT, HHCS 1/2-13 X 1-1/4" 012521 DOOR, CLEANOUT 020190 NUT, LOCK 5/16-18 FLG 020700 COTTER PIN, 3/16 X 2 1/2 021360 PIN, CLEVIS 5/16 X 3 ZN 022920 WASHER, FLAT 5/16 STD 036740...
-
Page 40: Mixing Auger Assembly
SECTION 1: ILLUSTRATED PARTS LIST MIXING AUGER ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 41 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. JR50 QTY. JR75 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 011370 BOLT, HHCS 3/8-16 X 1-1/2 013960 PB BEARING, 1-5/8 W/LC 018680 SUPPORT, MAIN...
-
Page 42: Weighbars And Gearbox Assembly
SECTION 1: ILLUSTRATED PARTS LIST WEIGHBARS AND GEARBOX ASSEMBLY ITEM 0033 0052 0053 0053 0107 0113 0126 0139 0165 0186 0207 0207 0211 0211 0212 0229 0266 0272 0351 03542 0367 0368 0491 1473 1569 1603 2198 2442 2442 3639 3639 3960 3961... - Page 43 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY - 1 QTY - 2 QTY - 3 003350 WASHER, LOCK 1" 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 010730 BOLT, HHCS 1/2-13 X 1-1/4" 011370 BOLT, HHCS 3/8-16 X 1-1/2 012630...
-
Page 44: Weighbars And Gearbox Assembly (Continued)
SECTION 1: ILLUSTRATED PARTS LIST WEIGHBARS AND GEARBOX ASSEMBLY (CONTINUED) ITEM 0033 0052 0053 0053 0107 0113 0126 0139 0165 0186 0207 0207 0211 0211 0212 0229 0266 0272 0351 03542 0367 0368 0491 1473 1569 1603 2198 2442 2442 3639 3639 3960... - Page 45 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY - 1 QTY - 2 QTY - 3 219870 HITCH, 1-7/8 DIA 2-1/8 5-PIN 244280 CONNECTOR, BULKHEAD 244290 NUT, LOCK 1/8-NPSM 363910 BRAKET, MOUNTING 363990 COVER WLDT, 396050 SEAL, OIL 1.875ID X 2.725OD 396100 HUB ASSY, 6-BOLT 428660...
-
Page 46: Auger Feeder Mount Assembly
SECTION 1: ILLUSTRATED PARTS LIST AUGER FEEDER MOUNT ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 47 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005200 WASHER, FLAT 1/2 STD 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 007080 BOLT, HHCS 1/2-13 X 2-1/2 012260 BOLT, HHCS 3/8-16 X 1 012270 WASHER, FLAT 013600 PIN, ROLL .25 X 2 015120 PIN, DRAG...
-
Page 48: Auger Feeder Assembly
SECTION 1: ILLUSTRATED PARTS LIST AUGER FEEDER ASSEMBLY Manual No. 642550 Art’s-Way Manufacturing Co., Inc. - Page 49 SECTION 1: ILLUSTRATED PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. 005360 NUT, HEX 1/2-13 005370 WASHER, LOCK 1/2 011530 KEY, SQ, 1/4X1-1/4 012310 BEARING ADAP., 012330 FLG., 7/8-1.0 BRG, 3R BOLT 012410 BOLT, CRG 5/16-18X3/4 013600 PIN, ROLL .25 X 2 014770 BOLT, HHCS .50-13X1.50 021180...
- Page 50 SECTION 1: ILLUSTRATED PARTS LIST NOTES: ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ Manual No. 642550 Art’s-Way Manufacturing Co., Inc.
- Page 51 SECTION 1: ILLUSTRATED PARTS LIST NOTES: ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
- Page 52 SECTION 1: ILLUSTRATED PARTS LIST NOTES: Manual No. 642550 Art’s-Way Manufacturing Co., Inc.
- Page 53 SECTION 1: ILLUSTRATED PARTS LIST NOTES: Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
- Page 54 SECTION 1: ILLUSTRATED PARTS LIST Manual No. 642550 Art’s-Way Manufacturing Co., Inc.
- Page 55 SECTION 1: ILLUSTRATED PARTS LIST Art’s-Way Manufacturing Co., Inc.. Manual No. 642550...
- Page 56 Art’s-Way Manufacturing Co., Inc. TECHNICAL MANUALS Manuals are available from your local dealer or Art’s-Way Manufacturing Co., Inc. for the operation, service, and repair of your machine. For prompt convenient service, contact your local dealer for assistance in obtaining the manuals for your machine. Your local dealer can expedite your order for operator manuals, illustrated parts catalogs, service manuals, and maintenance records.
Need help?
Do you have a question about the JR50 and is the answer not in the manual?
Questions and answers