Safety Rules; Cleaning And Inspections - Dea ROCK Operating Instructions And Warnings

This guide has been prepared for the fi nal users of the automatism; the installer is required to deliver this gui-
de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-
tion to all the other users. These instructions must be carefully conserved and easily available for consultation
when required.
Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact
the installer regularly for routine maintenance and in event of anomaly.
1. Always keep a safe distance from the automatism during operation and never touch any moving part.
2. Prevent children from playing near the automatism.
3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop
using the automatism whenever signs of malfunction are noted.
4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by
qualifi ed personnel.
5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use
of the release mechanism and the location of the release keys.
All ROCK models have an unlocking system; the working of this system is the following. Unscrew the closure
cap positioned on the head of the bollard; Insert the relevant key supplied, loosen anti-clockwise by approx. 1
turn and wait for the bollard to descend completely.
To take the bollard back to working condition, turn the key clockwise.
WARNING: The bollard may have uncontrolled movements during the release operation: pay maximum
attention in order to prevent every possible risk.
WARNING: Remember to tighten the cap on completion of the manual handling operations, so that the release
device is always protected from water and dust.
The only operation that the user can and must do is to remove leaves, branches and any other debris that
restricts the movement from ROCK. Warning! Always disconnect the power supply whenever performing ope-
rations on the gate!
INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

ROCK RELEASE MECHANISM

CLEANING AND INSPECTIONS

DEA SYSTEM S.p.A.
Via Della Tecnica, 6 - 36013 PIOVENE ROCCHETTE (VI) - ITALY
tel: +39 0445 550789 - fax: +39 0445 550265
Internet: http:\\www.deasystem.com - E-mail: deasystem@deasystem.com