Advertisement
Quick Links
Advertisement
Summary of Contents for OSITO AST-003L
- Page 1 FILE NO. A0300L Operating Instructuons F D A CLEARED Health Expert Electronic Stimulator New Upgrade with Heating CLINICALLY TESTED SAFETY PRECAUTIONS DRUG CLASS II The product should be used in the correct manner, as MEDICAL FREE DEVICE explained in this manual, in order to prevent any accident.
- Page 2 Acknowledgment Thanks for choosing OSITO electronic muscle stimulator Before using it, please read the user manual carefully, especially the caution part, so that you can operate it correctly, and the user manual should be well-kept for your reference at any time.
- Page 3 Adverse Reactions Instructions for Use -------------------------------------------------------------- 12-24 How Long Should I Use OSITO? Step 1: Setting up OSITO for the first time Step 2: Setting up OSITO for use Step 3: Using the foot-pads Step 4: Using the Body Pads...
-
Page 4: What Is Inside The Box
If you think anything is missing, contact us feel free on our osito_service@163.com or visit www.szosto.com service email: AC/DC power adapter Remote control SOLE BODY MODE TIME IR LED ON/OFF HEATING HEATING AAA batteries x 2 Body Pad cords x 2 OSITO new upgrade Body Pads x2 Pairs User manual... -
Page 5: Parts Identification
Parts Identification Parts of OSITO Foot-pads Control Power ON/OFF panel/display Carry handle Body Pad sockets AC/DC power adapter socket Controls of OSITO Foot-pad intensity control – /+ Body Pad intensity control – /+ BODY SOLE MODE Mode level control -/+... - Page 6 This kind of action will recycle which helps to accelerate the blood circulation and alleviate pain, swelling, fatigue, pain, and other symptoms. WHAT OSITO MAIN FEATURES: • Adopted to better ABS materials and design according to man-machine engineering science. The item looks very modern, fashion and delicate •...
- Page 7 Introduction of OSITO WHAT USAGE OF OSITO MODES Mode Type Usage 1.Accupuncture Pushing High blood pressure TENS 2.Accupuncture TENS Headache 3.Accupuncture Kneading TENS Abnormal menstruation 4.Accupuncture Tapping TENS Lumbar strain 5.Scrapping TENS Tired feet 6.Squeezing Sciatica 7.Massage Immune system Lumbago 8.Pushing Massage...
-
Page 8: Important To Know
Important to Know WHO SHOULD NOT USE OSITO Do not use if: (contraindications) • You’re pregnant. • You have a cardiac pacemaker, implanted defibrillator, or other implanted electronic device, if yes, this may cause electric shock, burns, electrical interference, or death. - Page 9 • You are in the care of a doctor • You are experiencing cramping leg pain that occurs during walking • You are unsure about the suitability of the OSITO for you • You are unsure about the cause of your symptoms •...
- Page 10 Important to Know WHEN SHOULD NOT TO USE OSITO • Please do not use the device together with other therapeutic equipment or electrical medical apparatus and similar. • Please do not use the device immediately after meals; wait for at least 1 hour.
- Page 11 • In the unlikely event your OSITO malfunctions, disconnect it from the power source and contact your authorized agent • The OSITO has passed the required tests for EMI, it may still be affected by excessive emissions and/or may interfere with more sensitive...
- Page 12 • Skin irritation and burns beneath the electrodes have been reported with the use of powered muscle stimulators • If you experience adverse reactions, stop using OSITO and talk with your doctor • The product should be used in the correct manner, as explained in this...
- Page 13 Instructions for Use How long should I use OSITO? Do not use OSITO more than 6 sessions of 30 minutes (or the equivalent) per day. This may result in muscle fatigue. It is recommended to use OSITO for 20-30 minutes per day.
- Page 14 Press the cover onto the back of the remote to close it. Before you use OSITO for the first time, read the Warnings and Cautions on pages 7-11. If in doubt, consult your doctor before using the product.
- Page 15 Make sure you remove all footwear, including socks / stockings. If desired, apply a moisturizing lotion/olive oil to the soles of your feet. Tip: Applying a moisturizing lotion/olive oil to the soles of the feet before using OSITO can help improve the delivery of electrical stimulation.
- Page 16 Instructions for Use Press the power button on the OSITO or remote control to turn OSITO on. SOLE BODY MODE You will hear a beep and the control panel settings light up. TIME IR LED To turn off OSITO at any time during...
- Page 17 Instructions for Use Press the foot pad intensity (+) button one time to start stimulation. You can set the intensity between 1-50. Press the foot pad intensity (+) button until it is at the desired level. BODY SOLE MODE Use an intensity that provides you with strong comfortable muscle...
- Page 18 OSITO does not vibrate. The time control/display will start to count down in minutes as OSITO cycles through its program. When OSITO times out, the time display reads (00) and you will hear three beeps. The OSITO switches itself off automatically.
- Page 19 Instructions for Use STEP 4: USING THE BODY PADS Each OSITO comes with two pairs of reusable (up to 20-30 applications) Body Pads that can be used to deliver electrical stimulation to the knees, shoulders, back or arms. Do NOT use the Body Pads on your head, face, neck or chest.
- Page 20 Instructions for Use Select the area you wish to apply electrical stimulation. If you wish to treat two areas at the same time, apply a pair of Body Pads to each area. Example placements are shown below:...
- Page 21 Leaving a gap may cause disconnection. Plug the other end of the Body Pad cord into either of the openings on the side of OSITO. If you are using both pairs of Body Pads, repeat this step for the remaining Body Pad cord.
- Page 22 You will hear a beep and the control panel TIME IR LED settings light up. ON/OFF To switch off the OSITO unit at any time HEATING HEATING during operation, simply press the power ON/OFF button. Set the time for the number of minutes you want to use OSITO.
- Page 23 Instructions for Use Press the Body pad mode (+) button one time to choose the different massager modes . You can set the mode between 1-25. SOLE BODY MODE TIME IR LED ON/OFF HEATING HEATING Press the Body Pad intensity (+) button until it is at the desired level.
- Page 24 Instructions for Use The time control/display will start to count down in minutes as OSITO cycles through its program. When OSITO times out, the time display reads (00) and you will hear three beeps. The OSITO switches itself off automatically.
- Page 25 About the OSITO Remote Control The technology used in the remote control allows an emitted infrared signal to be sent to the OSITO unit. Infrared is a common and reliable technology within remote control devices. The signal is a binary-coded command that is unidirectional and low speed.
-
Page 26: Troubleshooting
Porblem Possible Cause Solution Not placing both bare Ensure that your feet are OSITO is on (lights feet on the foot-pads at bare and each foot is placed illuminated on the LED the same time. on each of the foot-pads at... - Page 27 Troubleshooting Porblem Possible Cause Solution The intensity level may This is a very safe device. be on too low a setting. Keep increasing intensity level towards 50 until feel stimulation. You may find that you have to increase the intensity level as you get used to the therapy.
- Page 28 AC Adaptor is plugged Adaptor not plugged into the device correctly. If into device properly. still not working – contact your authorized dealer. OSITO is not vibrating. OSITO IS NOT DESIGNED TO VIBRATE. My legs are aching have Leave adequate time after after treatment.
- Page 29 Symbols Explanation of figures, symbols, warning statements and abbreviations on the equipment (Symbol for "BATCH CODE". This symbol should be with Production Batch No, and next to graph, batch code and lot number and batch number and so on) Examples: ABC123 (Symbol for "DATE OF MANUFACTURE".
- Page 30 Symbols Symbol for "Authorized Representative in the European Community” ("EU authorized representatve" tag), the tag should include the company name and address Of the company authorized bythe European Union. The waste products should behand ledlegally. BF devices Upside Fragile Keepdry Stacking Device's serial number Protected from touch by fingers and objects greater than 12...
-
Page 31: Technical Specifications
Technical Specifications Name of product OSITO Model AST-003L Weight 2.49Kg (5.5lb) Dimensions Ø 497mm x 191mm x 435mm ( Main Machine) Ø 65mm x 120mm ( Body pads) Material ABS / PS Power Source: Powered by adaptor Safety Mark HDMA10U-050200... - Page 32 Technical Specifications Operation Condition Storage Condition 10-40 C 0-40 C 30% RH ~ 75%RH ≤80% RH 860 hPa to 1060 hPa 860 hPa to 1060 hPa The Remote Control replicates the controls found on the device Operating Frequencies 38 KHz Operating Range Distance 0 to 25m at horizontal 0 to 18m at +/- 30 degree angle from...
-
Page 33: Warranty
Model no: ............original till receipt or invoice to indicate Lot no: ............the date of initial purchase. All OSITO devices are individually To qualify for the 2 year guarantee, the tested before leaving the factory. In the device must... - Page 34 Warranty EXCLUSIONS: Accessories such as Electrode pads are not covered by the guarantee. OSTO Ltd, manufacturer of OSITO Batteries and damage from leakage devices, shall not be liable to replace are not covered by the guarantee. or repair the goods under the terms of •...
- Page 35 Shenzhen OSTO Technology Company Limited No.43, Longfeng road,Xinsheng community, Longgang street, Longgang district, Shenzhen city,Guangdong Prinvice, China...
Need help?
Do you have a question about the AST-003L and is the answer not in the manual?
Questions and answers
I need directions on selecting intensity settings for my Osito?Rick
To select the intensity settings for the OSITO AST-003L:
1. Use the intensity buttons on the control panel or remote control to adjust the level.
2. Start from zero and increase until you feel a strong but comfortable muscle contraction.
3. Intensity may vary daily, so adjust accordingly.
4. If using both pairs of Body Pads, the intensity buttons control both at once.
5. If you feel pain or discomfort, lower the intensity using the (–) button.
This answer is automatically generated
I need directions on selecting intensity settings for my Osito?
What if you don't select a mode?
If you don't select a mode on the OSITO AST-003L, no stimulation will occur because the mode and intensity must be selected for the device to start functioning.
This answer is automatically generated