Related Manuals for Nemo DSS-220200
Summary of Contents for Nemo DSS-220200
- Page 3 Functional Description and Specifications Intended Use The Nemo V2 Divers Drill can be used underwater, in wet conditions, and on dry land. This tool is a valuable asset to any professional who works in and around water. Packing List Your Nemo V2 Divers Drill is packaged together with the following accessories: ♦...
- Page 4 Nemo V2 Divers Drill Model DDV2-18-3Li-50 Battery pack voltage 18V Li-ion Battery cell specification 3Ah / 6Ah No load speed (two speeds) 0 – 400 / 0 – 1500 RPM Maximum torque 345 in-lbs ( 39 N-m ) Chuck size ½...
- Page 5 Safety Warnings Warning: Read all safety warnings and instructions, and save them for future reference. Failure to adhere to these warnings can result in serious injury and damage to equipment. Work Area Safety ♦ All work should be done in accordance with the local, state, and government occupational safety and health guidelines.
- Page 6 Caution: Under no circumstances should the power tool be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the power tool invalidates the manufacturer warranty. ♦ Use power tools, accessories, and tool bits in accordance with...
- Page 7 Rechargeable Battery Safety ♦ Use only the battery pack supplied with your power tool. ♦ When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, and screws, which can make a connection from one terminal to another. ♦...
- Page 8 Getting Started with the Drill Your V2 Nemo Divers Drill (DDV2-18-3Li-50) includes the following main components:...
- Page 9 Charging the Battery The Li-ion batteries are supplied partially charged, and must be charged to full capacity using the battery charger provided with the drill before using the drill for the first time. Caution: Only use the battery charger provided with the drill.
- Page 10 The battery begins charging as soon as it is connected to the charger. ⬥ A steady red light on the battery charger indicates that the battery is charging. ⬥ A steady green light on the battery charger indicates that the battery is fully charged. Note: The battery is equipped with an NTC temperature controller that only allows it to be charged when its temperature is between 32˚...
- Page 11 Removing a Battery from the Drill 1. Set the rotational direction switch to the middle position. Caution: To minimize the risk of accidental activation, always ensure the rotational direction switch is in the neutral (middle) position before performing any maintenance work on the drill, as well as during transportation and storage.
- Page 12 Replacing the Keyless Chuck 1. Set the rotational direction switch to the middle position. Caution: To minimize the risk of accidental activation, always ensure the rotational direction switch is in the neutral (middle) position before performing any maintenance work on the drill, as well as during transportation and storage.
- Page 13 chuck . Use silicone spray on the chuck jaws to ensure smooth operation . Pressurizing the Drill for Underwater Use Your drill can be used in any wet conditions, and can be submerged and used underwater at depths of up to 164ft ( 50m ). Before submerging the drill to any depth, it must be pressurized.
- Page 14 Best Practices for Underwater Operation Your Nemo submersible drill is designed to be waterproof, so that it can be used both on land and underwater. To obtain the maximum serviceable life of your drill, adhere to the following best practices when using the drill underwater: ♦...
-
Page 15: Operating The Drill
Operating the Drill Switching the Drill On or Off ♦ Press the On/Off trigger, and keep it pressed. You can increase the speed of the drill by increasing the pressure on the switch. To switch off the drill, release the On/Off trigger. Note: When the On/Off trigger is not pressed, the spindle and the tool holder are locked so that the drill can be used as a screwdriver when the battery is dead. - Page 16 Selecting the Torque 1. Set the rotational direction switch to the middle position. Caution: To minimize the risk of accidental activation, always ensure the rotational direction switch is in the neutral (middle) position before performing any maintenance work on the drill, as well as during transportation and storage.
- Page 17 Performing Drill Operations 1. Secure small workpieces using a vise or similar device. 2. Lightly press the tool tip against the workpiece. Excessive force will damage the tool tip and will not increase the drilling speed. 3. Hold the drill firmly and carefully as the bit begins to break through the workpiece.
-
Page 18: Maintenance
Caution: Under no circumstances should the drill be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the drill invalidates the manufacturer warranty. Transporting the Drill For maximum protection, always transport your drill secured in its carrying case, with the battery removed. - Page 19 Caution: Under no circumstances should the drill or accessories be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the drill invalidates the manufacturer warranty.
- Page 20 Problem: The battery charger is warm to the touch. Possible Cause Corrective Action Continuous or repetitive No corrective action is required as charging cycles without a this does not indicate a fault with break may cause the the battery charger. charger to warm up.
- Page 21 If the battery contacts are not damaged , recharging the battery for a short period ( even a few minutes ) will reset the battery`s electronics and restore the battery voltage to the voltage level before it shut down. If this battery or another battery experiences the same problem immediately upon restarting the tool , then a short circuit should be suspected and the tool should be inspected for needed repair .
- Page 22 Disclaimer : Nemo Power Tools Ltd reserves the right to change the contents of this manual at any time without prior notice . Nemo Power Tools Ltd www.nemopowertools.com...