Summary of Contents for Armstrong HE Series
- Page 1 Installation and operating instructions AC Induction motors File No: 48.80 Date: july 30, 2013 Supersedes: new Date: new...
- Page 3 contents Receiving inspection and handling Installation/mounting Location Electrical connections Start up Lubrication of ball or roller bearings Frequency or relubrication Type of grease Procedure for relubrication Inverter duty application Storage...
-
Page 4: Receiving Inspection And Handling
Condensation Drain Holes 5 Safety means and protection must not be by-passed or On Armstrong cast iron tefc motors, condensation drain holes rendered inoperative. are located at each end of the stator housing where the feet are 6 The electric motor frame must be grounded in located, and on the face of output flanged motors (tc, jm, jp). -
Page 5: Electrical Connections
i n sta l la tio n & o p er at i ng instr ucti o ns ac induction motors start up mounted f1 or f2 installations, remove plugs located at each end of stator. In vertical output shaft down flange mounted warning installations, remove plugs located on face of output flange. - Page 6 ½ - For heavy-duty, dusty locations. inverter duty application L - For severe-duty, high vibration and shock Please refer your application to Armstrong or its nearest type of grease distributor for instruction. Use Polyrex em Polyurea grease or equivalent unless special storage grease is specified on the nameplate.