Page 1
BOOM ARM MIC ADAPTER MH-70A Instruction Manual Congratulations on your purchase! For optimum performance, please read this Instruction Manual before playing. 取扱説明書 このたびは、 本製品をお買い上げいただき誠にありがとうございます。 製品の機能を十分に発揮してお使いいただくために、 この取扱説明書をぜひご覧下さい。 Wing-Nut / ウイングナッ ト Adjustable Clamp クランプ 5/8" Thread Adapter スレッ ドアダプター Anti-Vibration Adjustment Nut Rubber Insulator アジャストナッ...
Page 2
Stand Attachment Microphone Clip Installation スタンドへの取り付け マイクク リ ップの取り付け 1. Loosen Wing Nut (A) on the Boom Tilter and rotate the Loosen the Wing-Bolt of the Tilter and adjust it upwards, Boom Arm as shown (Fig.1.) then tighten Wing Nut (A) then tighten to secure.
Page 3
Microphone Position Adjustment Anti-Vibration Rubber Insulator マイク位置の調整 防振ゴムの外し方 Attach the Microphone to the Microphone Clip following Pearl Microphone Holders are equipped with a proprietary the manufacturer's instructions. Place the Microphone Anti-Vibration Rubber Insulator to improve sound quality into the desired position by a combination of adjustment by suppressing unwanted noise caused by vibrations.
Page 4
Depending on the application, the Anti-Vibration Rubber Insulator allow particular Always ensure the set position of the MH-70A is Microphones to shake significantly during use. stable and make any necessary adjustments When using a heavy or expensive Microphone, needed to achieve this.