Download Print this page

GSM Activate 4G-SWV-V10 Manual

2g/3g/4g 12v multi switch

Advertisement

Quick Links

GSM 2G/3G/4G
12V MULTI SWITCH
Activate devices with your mobile phone.
Call & Text activation, switch and timer mode
www.gsm-activate.co.uk
MODEL NUMBER 4G-SWV-V10
Page 1

Advertisement

loading

Summary of Contents for GSM Activate 4G-SWV-V10

  • Page 1 GSM 2G/3G/4G 12V MULTI SWITCH Activate devices with your mobile phone. Call & Text activation, switch and timer mode www.gsm-activate.co.uk MODEL NUMBER 4G-SWV-V10 Page 1...
  • Page 2: Product Information

    Our GSM Auto Dialler comes with a SIM Active function meaning that it will send a message every six weeks to a preprogrammed number we at GSM Activate own to prevent the SIM card being shut down due to inactivity.
  • Page 3: Important- Please Read

    INSTRUCTIONS IMPORTANT- PLEASE READ PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE SIMCARD AND YOU PLACE THE SIMCARD WITH THE CLIPPED CORNER AS SHOWN IN THE PICTURE ABOVE. Powering GSM Multi Switch Connect 12 volts to the input connector as per figure 1. Once power has been applied the blue network LED light will flash once every second.
  • Page 4: Reset Function

    How to Program the Multi Function Switch Once the unit has a green light it is ready to be used. The unit has a caller ID function so only authorised numbers you store can activate the unit. If caller ID is left OFF anyone phoning the units number can operate the relays.
  • Page 5 How to use the Multi Function Switch Call Mode: Relay 1 only Using your mobile phone dial the simcard number. You will hear 1 ring tone. The unit will automatically hang up. This will prevent any call charges. Only relay 1 can be used for calling. The relay will then turn ON and remain on.
  • Page 6: Status Report

    Relay Memory In the event of power loss the switch can remember the relay positions for when the power has been restored. Please send the text as follows: #MEMORY=ON# The unit will remember relay status in event of power failure #MEMORY=OFF# The unit will not remember relay status and power on with both relays set to off...
  • Page 7 For more technical support please browse the FAQ’s on our website www.gsm-activate.co.uk Alternatively email our technical support team at technical@gsm-activate.co.uk and we will do our best to reply within 24 hours Monday - Friday. 27/04/2021 GD Page 7...