Lippert Components 329164 Manuallines

Purpose

This feature was added to the wireless remotes to provide personalized security for the remote, as well as a
safety feature to prevent inadvertent activation of functions. To utilize this set of guidelines, the unit MUST
be equipped with a multifunction board and the touch screen remote. These guidelines do not apply to any
other remote.

To reset PIN Code

1.
Press "HOME" button to turn on transmitter.
2. Press and release "HOME" button five times.
3.
Press "CONFIG" (Fig. 1).
4.
The screen will ask you if you want to reset the screen lock PIN code (Fig. 2).
5. The screen will notify you that a PIN has been reset (Fig. 3).
Home
Button
6.
Press "Home" button and touch "Set PIN" button (Fig. 4).
7.
Enter 4-digit code of your choice (Fig. 5).
8. Touch "Save" button (Fig. 6).
Set PIN
Button
NOTE: To start programming over, push and hold the "Home" button for 5 secs to turn off the remote. Push
the "Home" button again to turn the remote back on and restart the programming procedure.
Rev: 01.25.2017
WIRELESS TOUCH SCREEN GUIDELINES
Fig. 1
CONFIG
Button
Fig. 4
ELECTRONICS
Fig. 2
Fig. 5
Page 1
Fig. 3
Fig. 6
SAVE
Button
TI-209