Advertisement

DRNX DUO BY BROOD
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRNX DUO and is the answer not in the manual?

Questions and answers

Summary of Contents for BROOD DRNX DUO

  • Page 1 DRNX DUO BY BROOD MANUAL...
  • Page 2: Table Of Contents

    CONTENTS SAFETY REGULATIONS GENERAL INFORMATION COMPONENTS INSTALLATION OPERATION ADJUSTABLE SETTINGS CARE TROUBLESHOOTING WARRANTY DECOMMISSIONING CONTACT DRNX DUO BY BROOD...
  • Page 3: Safety Regulations

    If DRNX is to remain inactive for a long time, turn it off and unplug it. Store it in a dry place, out of reach of children. Make sure the storage area is between 13°C and 40°C. Keep it protected from dust and dirt. DRNX DUO BY BROOD...
  • Page 4: General Information

    If the pre-filter is not attached, you can risk damaging components inside. BEVERAGE CONTAINER Any non-pressurized container can be used depending on what is required. We recommend using the designated BROOD container (sold separately). DRNX DUO BY BROOD...
  • Page 5: Components

    15 — Beverage Tube 7 — Legs 16 — Elbow Connectors 8 — Forward Plate 17 — Pre-Filter 9 — Rear Plate 18 — BROOD Beverage Container SPECIFICATIONS Width: 9.75in Power Supply: 100-120V/60Hz; 200-240V/50Hz Height: 14.75in Nominal Power: 334W Depth: 18.25in Weight: 73lbs Dispensing Capacity: 1.5L/min (0.4gpm)
  • Page 6: Installation

    Blockage in the machine due to large coffee particles. Make sure all tubes are pushed firmly in place. CONNECT TO CONTAINER Connecting to the designated BROOD container. 1. Pour your beverage into the designated container. Close the lid and push the seal.
  • Page 7: Operation

    Make sure the pre-filter adapter is installed in the beverage tube. Ensure that the coffee is filtered with a fineness of at least 100 μm (microns). Not using the pre-filter risks damaging the internal components of DRNX. DRNX DUO BY BROOD...
  • Page 8: Adjustable Settings

    This is a one-time calibration process to adjust the amount of infusion at the maximum position only. Locate and remove the four screws in the back panel. Locate the calibration knob. Turning it clockwise will decrease the amount of nitro. Return the back panel and screw it securely. DRNX DUO BY BROOD...
  • Page 9: Care

    Observe water being sucked into the ventilation ports. Only use clean water and NOT the cleaning solution for this step. BROOD recommends the following cleaning detergent: 1-2-COLD BREW Cleaner by Urnex DRNX DUO BY BROOD...
  • Page 10: Troubleshooting

    Pause for a moment between If pouring more than 1.5 litres (48oz.) pours. continuously and without stopping, then it might be necessary to pause for a few minutes for the exhaust fan to turn off until pouring a subsequent drink. DRNX DUO BY BROOD...
  • Page 11 There is a kink in the beverage tube Make sure the beverage tube underneath the machine stretches towards the back of the machine. This means there can be no possible kink underneath the machine. DRNX DUO BY BROOD...
  • Page 12: Faq

    BROOD container respectively. Please watch our instructional video on our website.
  • Page 13: Warranty

    The warranty period begins on the delivery date. If our transportation, storage or installation instructions are not followed, any warranty shall lapse. The warranty period is 1 year. The purchaser must inform BROOD Refreshments Company Ltd in writing of any transportation damages without delay, but at the latest within one week of arrival of the equipment. The purchaser must cease any processing or handling of the damaged units.
  • Page 14: Decommissioning

    For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. DRNX DUO BY BROOD...
  • Page 15: Contact

    CONTACT DRNX DUO BY BROOD...
  • Page 16 DRNX DUO BY BROOD...

This manual is also suitable for:

Drnx

Table of Contents

Save PDF