Advertisement
note: this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. children should be supervised to ensure that they do not play with the appliance.
2. introduction
High velocity fan suitable for movement of huge volumes of air. features new patented design whereby blades internally oscillate safely within
the fan body, enabling the fan to cover more than twice the area of a non-oscillating model. carefully balanced blades provide constant airflow
to complete area, whereas a standard oscillating fan covers only 1/4 of the area at any one time. three-speed power selection with switchable
oscillation control. robust cradle stand enables secure positioning. suitable for use in industrial, commercial, agricultural, automotive workshop and
showroom applications.
3.
specification
p
model no: .................................................................... HVf18is
fan Ø: .................................................................. 450mm (18")
speeds: ...................................................................................3
Power: ............................................................................... 58W
supply: ............................................................................. 230V
current: ........................................................................... 0.25A
Weight: ...........................................................................6.56kg
4. operation
o
‰
warning! ensure that you read, understand and apply safety instructions in section 1 before using fan.
4.1.
check that the speed control is set to "0" (off) and then plug into the mains power supply and switch the power on.
4.2.
the fan features 3 speeds which are selectable using the switch located at the back of the fan above the motor. settings 1 or 2 will suit
most needs, 3 is used for maximum air movement.
4.3.
use the switch on the side of the motor to turn the oscillation function on and off, see fig.1.
4.4.
Adjust the direction of the air flow by moving the base from side to side and tilting the fan up or down.
4.5.
When you have finished using the fan ensure you turn the speed control switch to "0" (off) and disconnect the fan from the mains
power.
5. Maintenance
‰
warning! ensure that the fan is disconnected from the mains power
supply before attempting any of the following:
5.1.
use a soft, damp cloth to clean the fan. do not immerse the fan in water
and never allow water to drip onto the motor housing.
8
do not use solvents, petroleum, paint thinner or other chemicals to clean
the fan. to clean the fan blade, undo the six screws around the circumference,
remove the front cover and clean the blade with a slightly damp cloth.
5.2.
replace the front grille and refit the six screws.
5.3.
should the motor, switch or the power lead require service or maintenance
contact your local service agent.
5.4.
When not in use place the fan in its original box or otherwise cover to protect
from dust, and store in a safe, dry, childproof location.
environMent protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.1
www.sealey.co.uk
HVf18is | issue:2(H, 4) 08/11/17
Advertisement
