Outdoor Leisure TD100 Assembly Instructions Manual page 3

5. Install electronic ignitor through cabinet wall. Tighten nut to
threaded stem.
Insert battery into electronic ignitor with positive terminal facing
outward.
Thread ignitor cap onto threaded stem of electronic ignitor.
122789-01A
6. Locate tank door. Attach tank door to cabinet with 4 screws (F)
and 4 nuts (G). Note: Hinges on tank door mount to face of cabinet
base.
7. Set cabinet base on top of previously assembled base weight.
Attach base to weight with 4 screws (A) and 4 washers (B).
Completed cabinet base.
www.desatech.com
3