Dtv Manual Tuning (Dvb-C); Dtv Manual Tuning (Dvb-T) - Changhong Electric LED42D2080H Operation Manual

6). Channel tuning will commence. This operation
may take up to several minutes. The display will
show the progress of the tuning and the number of
channels found.
7). If you want to skip the ATV tuning, press the MENU
button to interrupt the tuning half way. A pop-up screen
will be displayed, press the
confirm. You will then go straight to DTV tuning. You
may repeat the above step if you also want to skip the
DTV tuning.
8). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select
P rogramme Edit under the channel menu.
TV Programme(s)
Programme(s)
Programme(s)
Programme(s)
NOTE:
All the channels including ATV, DTV and Radio
can be tuning by one time,if the Tune Type is
DTV+ATV .
All the stored channels will be disappear after
auto tuning .
After auto tuning , the channel will skip to
the first DTV channel.

2. 1 DTV Manual Tuning (DVB-T)

1). Press the MENU button and then press the
buttons to select the CHANNEL menu.
2). Press the buttons to select DTV Manual
Tuning and then press the OK button.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
<
CHANNEL Signal Information
CI Information
Software Update
button to select YES to
(ATV)
>
TV OPERATION
3). The DTV Manual Tuning screen will pop up.
Press the buttons to select the desired UHF
channel and then press the OK button to commence
the search of that channel. When the signal has
been tuned, the picture and signal strength will be
displayed on the screen.
4). Press the MENU button to return back to the main
menu.
5). Press the EXIT button to exit the menu.

2. 2 DTV Manual Tuning (DVB-C)

1). Press the MENU button and then press the
buttons to select the CHANNEL menu.
2). Press the buttons to select CADTV Manual
Tuning and then press the OK button.
<
CHANNEL
3). The CADTV Manual Tuning screen will pop up.
Press the buttons to select(Frequency /Symbol
(ks/s/QAM Type QAM) press the OK button to
commence the search of that channel. When the
signal has been tuned, the picture and signal
strength will be displayed on the screen.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
Auto Tuning
CADTV Manual Tuning
ATV Manual Tuning
Programme Edit
>
Signal Information
CI Information
Software Update
UK
UK 14