Lite UNO ECLIPSE Installation Manual

Model Model Voltage
Voltage
UNO ECLIPSE
220-240V ~
UNO ECLIPSE
220-240V ~
UNO ECLIPSE
220-240V ~
Model Voltage
UNO ECLIPSE
220-240V ~
UNO ECLIPSE 220-240V~
UNO ECLIPSE 220-240V ~
UNO ECLIPSE 220-240V~
Suitable for following version; Warm White:2700K-3200K Neutral White:3800K-4200K Cool White:6000K-
6600K
UNO ECLIPSE 220-240V ~
UNO ECLIPSE 220-240V~
Suitable for following version; Warm White:2700K-3200K Neutral White:3800K-4200K Cool White:6000K-
Suitable for following versions: Warm White:2700K-3200K Neutral White:3800K-4200K Cool White:6000K-
6600K 6600K
• Always follow this instruction to ensure correct and safe installation and functioning of the luminaire and keep it for
future reference.
Always isolate the power before commencing installation.
• If in doubt, consult a qualified electrician. Ensure that you always install the luminaire to the relevant regulations.
Always follow this instruction to ensure correct and safe
installation and functioning of the luminaire and keep it
for future reference.
Always isolate the power before commencing installation.
If in doubt, consult a qualified electrician. Ensure that you
always install the luminaire to the relevant regulations.
UNO ECLIPSE INSTALLATION GUIDE
Wattage Luminous Flux
Wattage Luminous Flux
1800LM(Warm White)
1800LM(Warm White)
18W
1800LM(Neutral White)
18W
1800LM(Neutral White)
2900LM(Warm White)
Model Voltage Wattage
29W
Wattage
2900LM(Neutral White)
2900LM(Warm White)
UNO ECLIPSE
3800LM(Warm White) 220-240V ~
29W
18W
38W
2900LM(Neutral White)
3800LM(Neutral White)
29W
UNO ECLIPSE 220-240V ~
3800LM(Warm White)
38W
38W
3800LM(Neutral White)
UNO ECLIPSE 220-240V ~
Suitable for following version; Warm White:2700K-3200K Neutral White:3800K-4200K Cool White:6000K-
6600K
IP54
Always follow this instruction to ensure correct and safe
installation and functioning of the luminaire and keep it
for future reference.
Always isolate the power before commencing installation.
UNO ECLIPSE
Φ
UNO ECLIPSE
UNO ECLIPSE
Suitable for following version; Warm White:2700K-3200K Neutral White:3800K-4200K
6600K
W/Φ (mm)
W/Φ (mm) H (mm)
350 70
350
Luminous Flux W/Φ (mm)
350 70
Luminous flux
1800LM(Warm White)
18W
350
1800LM(Neutral White)
1800lm
350 70
2900LM(Warm White)
2900lm
29W
2900LM(Neutral White)
350
3800LM(Warm White) 3800lm
38W
3800LM(Neutral White)
IP54
IP54
Installation,Usage and Maintenance Guide
1.Safety Instructions
Φ
• Installation, fixing and connection should be carried out by a
Model
Voltage Wattage
• Switch off the power supply before installation, fixing and op
220-240V ~ 18W
you might suffer potential electric shock.
220-240V ~ 29W
• Don't hang or fasten anything onto the product, especially no
Φ
• The product should be exposed to free air circulation and no
220-240V ~ 38W
• During the installation of the product keep children away and product s
2.Terms of use
H (mm)
This product serves illumination purposes only and is to be us
70
conditions mentioned below:
H (mm)
W/Ø (mm)
• Within specified voltage.
350 70
70
350
• Before using the product it has to be fixed and fastened prop
350
350 70
fastening is only allowed under dry and ventilated conditions.
70
350
350 environment-polluted conditions are inadvisable. 70
• The product cannot be exposed to a strong electromagnetic
function properly or even fail to function.
• After a long period of storage, do check the product before in
potential dampness or check on damage in its appearance an
dangers. Dimming function: please refer to the specification of
• Using LEDESHI original LED driver to ensure optimal functio
3.Installation Instructions
• To fix the product only use the installation material/parts incl
the product will not be mounted safely and might thus lead to mor
• Before installation, check for loose parts in the housing. If the
install the product to operate. Otherwise the product will not w
even cause an electric shock.
Always follow this instruction to ensure correc
4.Maintenance
installation and functioning of the luminaire an
for future reference.
• Before cleaning the product, switch off the power supply and
Any negligence to this may be dangerous: risk of an electric s
Always isolate the power before commencing
Use a slightly wet, soft lint-free cloth to clean.
5.Failure
If in doubt, consult a qualified electrician. Ens
always install the luminaire to the relevant reg
• In case of a failure or malfunction: switch off the power supp
before taking any further action and do not touch the product.
run the risk of an electric shock.
Correct Disposal of this product
• In case of a failure, call for a professional electrician to check
This marking indicates that this product should not be disposed wi
wastes throughout the EU. To prevent possible harm to the enviro
product before using it again.
health from uncontrolled waste disposal, recycle it responsibly to pro
reuse of material resources. To return your used device, please us
collection systems or contact the retailer where the product was pu
take this product for environmental safe recycling.
Installation,Usa
1.Safety Instructi
• Installation, fixin
• Switch off the p
Installation,Usage and Mainten
you might suffer
Luminous Flux
1800LM(Warm White)
1.Safety Instructions
Ø
• Don't hang or fa 1800LM(Neutral White)
• Installation, fixing and connecti
2900LM(Warm White)
2900LM(Neutral White)
• The product sho
• Switch off the power supply be
3800LM(Warm White)
you might suffer potential electri
3800LM(Neutral White)
• During the installa
• Don't hang or fasten anything o
2.Terms of use
H
• The product should be exposed
• During the installation of the produc
This product serv
IP54
2.Terms of use
H (mm)
conditions mentio
This product serves illumination
70
conditions mentioned below:
• Within specified
70
• Within specified voltage.
70
• Before using the
• Before using the product it has
fastening is only allowed under d fastening is only
environment-polluted conditions
environment-poll
• The product cannot be expose
• The product can
function properly or even fail to f
• After a long period of storage, d
function properly
potential dampness or check on
• After a long per
dangers. Dimming function: plea
• Using LEDESHI original LED d
potential dampne
3.Installation Instructions
dangers. Dimmin
• To fix the product only use the
the product will not be mounted sa
• Using LEDESH
• Before installation, check for lo
3.Installation Inst
install the product to operate. Ot
even cause an electric shock.
• To fix the produ
4.Maintenance
the product will no
• Before cleaning the product, sw
Any negligence to this may be d • Before installati
Use a slightly wet, soft lint-free c
install the produc
5.Failure
even cause an el
• In case of a failure or malfuncti
before taking any further action a
4.Maintenance
run the risk of an electric shock.
Page 1
• Before cleaning
• In case of a failure, call for a pr
W/Φ