Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for 3TEMP Hipster PULS
Summary of Contents for 3TEMP Hipster PULS
- Page 1 Rev.100317-02 Hipster PULS User manual PULS 200101 Made in Sweden...
- Page 2 Rev.100317-02 Hipster PULS...
-
Page 3: Preface
The fresh water system and the recipe parameters makes a huge impact on the taste and a tiny impact on the environment as it consumes barely 7 watts when not brewing. We hope you will enjoy your new Hipster brewer. With best wishes Copyright 2021 All rights reserved 3TEMP Hipster PULS... - Page 4 Rev.100317-02 Hipster PULS...
-
Page 5: Table Of Contents
2.4 Capacity of the machine...............7 2.5 General safety instructions ............7 2.6 Disposal ....................9 3. Before first use ................9 4. Product description Hipster PULS ......10 4.1 Description ..................10 4.2 The cycle of The Hipster taste-profiling ......11 5. Technical data ................12 5.1 Hipster PULS ..................12... -
Page 6: Safety Information
Do not use this appliance for anything other than intended use. Any maintenance other than cleaning should be performed by authorised person. Do not install the machine in environments in which the temperature is 0 C or less. Do not use outdoors. Hipster PULS... -
Page 7: Capacity Of The Machine
We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or any questions. Please contact our support@3temp.com The appliance is only to be installed in locations where it can be overseen by trained personnel. - Page 8 Only use original spare parts. The use of spare parts not approved by the manufacturer could lead to fires, electric shocks or personal injury. Do not place on top of any other appliance. Appliance must not be cleaned by a water jet. Hipster PULS...
-
Page 9: Disposal
3. Before first use Remove all packaging materials attached to your Hipster PULS. Ensure that you have removed all parts and accessories before discarding the packaging. Clean parts and accessories, filter, basket and thermos. Use warm water and a gentle dish washing liquid and rinse well. -
Page 10: Product Description Hipster Puls
Rev.100317-02 4. Product description Hipster PULS 4.1 Description Brewer hat Brew basket Touch controller Water inlet On/Off connection On / Off Drip tray insert Driptray Thermos 3,8 l Thermos 2,5 l Level tube Coffee tap Hipster PULS... -
Page 11: The Cycle Of The Hipster Taste-Profiling
Rev.100317-02 4.2 The cycle of The Hipster taste-profiling Pre-brew phase End phase Target ”Regular” brewer Time + Blooming Pre-brew phase End phase End phase Hipster PULS... -
Page 12: Technical Data
Rev.100317-02 5. Technical data 5.1 Hipster PULS Including button controller, router. The machine is placed on the counter. Capacity: 200 cups/h (1x3,8 lit). Dimensions main unit: W 286mm/D 400mm/H 636mm. Weight total : 21 kg. Max power hot: 230V 1x2400W. -
Page 13: Wiring Diagram
Rev.100317-02 5.2 Wiring diagram. 220-240 VAC 2400W Hipster PULS... -
Page 14: Unpacking
Rev.100317-02 6. Unpacking Router Brew basket plastic Coffee filter 1x 25. 110/330 Thermos 2,5 Litres Inlet hose Hipster PULS... -
Page 15: Installation Instructions
ELECTRICIAN Hex key 4 mm 2,5 mm 7.2 Connect the PULS 1. Fasten the cords. Tighten the inlet hose on the backside, according to national standard ref. cl. 7.12.1 in 60335-2-75. On / Off Inlet hose Power inlet Hipster PULS... -
Page 16: How To Change Side Of The Button Controller
. Fasten the panels with the magnets and the controller either on the left hand side or the bracket for the button controller. right hand side Wood panels This side is for the button controller. Metal panels Adhesive tape This side is for the button controller Hipster PULS... - Page 17 Rev.100317-02 Route the CAN cable through the side wall . Attach the CAN cable to the backside of the plug. Tighten the screw with a hex key. Fasten the button controller and attach the CAN cable. Hipster PULS...
-
Page 18: Connect The Water Filter System
Start a run cold. 300-400 ml will be dispensed, Now the PULS is installed. You are now ready to brew see page 20. 7.6 Start the PULS Press ON button to start the PULS On/Off On / Off Hipster PULS... -
Page 19: Machine Status
Note! For 3TEMP to be able to support you in the best possible way, please connect your Hipster to the internet via LAN, WLAN or GSM. Use tethering on the router and connect to your existing Wi-Fi. -
Page 20: User Instructions
Add filter to the brew basket. Add coffee into the filter Note! Make sure the filter fits correct. Note! Make sure the coffee is spread Use 3TEMP coffee filter paper evenly and the surface is flat. Hipster PULS... -
Page 21: Select Recipe
Rev.100317-02 Ready to brew. Reinstall the brew basket. 8.2 Select recipe Select a recipe Adjust grams or millilitre. If needed. HIPSTER HIPSTER recipe start/stop recipe start/stop grams of coffee grams of coffee setup setup thermos thermos Hipster PULS... - Page 22 Brewing is in progress when the blue When the brew is finished, the indicator indicator is flashing. light turns green and a beep is heard. HIPSTER HIPSTER recipe start/stop recipe start/stop grams of coffee grams of coffee thermos setup thermos setup Hipster PULS...
-
Page 23: Thermos Detachable Serving Base
Rev.100317-02 8.3 Thermos detachable serving base Place the thermos and place it on Place the cup on the white spot. the detachable serving base Click! Press for coffee. Warning! Hot coffee. Press Hipster PULS... -
Page 24: Recipe Settings With Button Controller
(Disabled recipe is still in the machine but does not show when pushing “Recipe 1-8” in normal mode). Button 3: Step Down/Back/Previous item (-) in every menu. Button 4: Step Up/Forward/Next item (+) in every menu. Button 5: Previous menu/Back/Cancel Button 6: Next Menu/OK Hipster PULS... - Page 25 . Repeat step 6 and 7 until “Confirm Save” appears. Confirm by pressing . Menu is now back in “Edit recipe”. Select another slot by using repeating steps 2-9 or leave “Programming mode” by pressing Note! Button always moves back to previous selection. Hipster PULS...
- Page 26 Enabled/Disabled status of slot. 3. Press to enter “Confirm Enable/Disable”. 4. Press to confirm Enable/Disable slot. Note! Button always moves back to previous selection. HIPSTER recipe start/stop grams of coffee setup thermos Hipster PULS...
-
Page 27: Care And Maintenance After Use
Use a soft cloth to clean the drip tray. Important! Keep the coffee machine clean. Caution! Do not use liquids other than water. Danger! Appliance must not be cleaned by a water jet. Hipster PULS... -
Page 28: Cleaning Thermos
10.2 Cleaning thermos Remove the brew basket from Clear any object free from the brew basket. the brewer hat. Make sure the thermos is empty. Cleaning Tablet (Part Nr :100204) Caution! Protect your eyes. Warning! Keep away from children. Hipster PULS... - Page 29 Rev.100317-02 Reinstall the brew basket and the thermos. Choose suitable recipe. 3TEMP recommend 2,5 lit HIPSTER recipe start/stop grams of coffee thermos setup Press Start on the Button controller Wait for the brew process to finish. Press STOP to interrupt the brewing process.
- Page 30 1 -2 hour in the thermos. Warning! Hot water Protect your eyes. Clean it with a dish brush. Rinse out several times! Caution! Make sure that no cleaning fluid is left in the thermos. Rinse out properly. Hipster PULS...
-
Page 31: Cleaning Water Strainer
Protect your eyes. Clean water strainer using the dissolved Reassemble shower screen. cleaning solution prepared in step 1. Caution! Tighten all screws evenly and make sure water strainer is in level. Do not overtighten. You could damage the water strainer. Hipster PULS... -
Page 32: Spare Parts
500242 Water filter installation kit typ 1 500243 typ 2. 500249 Wi-fi router and tablet 600919 230 3G 600920 UK 4G 600920 240 4G 600920 US 4G Wire insert 500913 Wire insert Single brew 500953 Non-return valve 550038 Hipster PULS... -
Page 33: Extra Additions
Your new Hipster is pre-loaded with 30 free cold brews for you to test. To order the cold brew function; contact support@3temp.com. Single brew Brew basket steel 600537 Wire insert... -
Page 34: Declaration Of Conformity
A part of EU “Green Deal”. Designed for circular economy with concept BAAS (brewer as a service) Measured levels below Swedish heavy metal norm. SLVFS 2001:30 Hipster Taste Quality: European Coffee Brewing Center (ECBC) approved 1.5-2.5 litres. Anders Eriksson, CEO 3TEMP Hipster PULS... -
Page 35: Warranty
This warranty covers faults occurring during the warranty period, which have been notified to the reseller or verified by 3TEMP (warrantor) or a representative of the warrantor, and which concern design, manufacturing or material defects and consequential damages occurring on the product itself. -
Page 36: Notes
Rev.100317-02 15. Notes Hipster PULS... - Page 37 Rev.100317-02 Hipster PULS...
- Page 38 Rev.100317-02 3TEMP can not accept any responsibility for possible errors in catalogues, broschures and other printed material provided that such alterations can be made without sub sequential changes being necessary in specifications 3TEMP. All rights reserved 2019. Hipster PULS...
- Page 39 Rev.100317-02...
- Page 40 Rev.100317-02 ‘‘The details create the big picture’’ Web: 3temp.com Mail: 3TEMP Magasinsgatan 3 67131 Arvika Email: info@3temp.com Hipster PULS...
Need help?
Do you have a question about the Hipster PULS and is the answer not in the manual?
Questions and answers