HV-L34PRO
Measuring
Item
instrument
Adjustment
Remote
of SUB
control unit
COLOURⅠ Ⅰ Ⅰ Ⅰ
SERVICE MENU KEY
ZOOM
(ASPECT)
key
SETTING ITEM
SELECT key
(Numbers key)
PICTURE
CONTENTS
key
PIP key
FUNCTION key
(UP/DOWN &
LEFT/RIGHT key)
MENU/OK key
MEMORY
(STORE)
key
24
Test point
Adjustment part
7.COLOUR
(PAL/SECAM/NTSC)
PAL COLOUR
SECAM COLOUR
NTSC COLOUR
SERVICE
MENU/
&SYSTEM
CONSTANT
key
No. 51809
Description
[Method of adjustment without measuring instrument]
(PAL COLOUR)
1. Receive PAL broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 7.COLOUR with the function UP/DOWN key.
4. Set the initial setting value for PAL COLOUR with the function
LEFT/RIGHT key.
5. If the colour is not the best with the initial set value, make fine
adjustment until you get the best colour.
6. Press the MENU/OK key and memorize the set value.
(SECAM COLOUR)
1. Receive a SECAM broadcast.
2. Make fine adjustment of SECAM COLOUR in the same
manner as for above.
(NTSC 3.58 COLOUR)
1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the
EXT terminal.
2. Make similar fine adjustment of NTSC 3.58 COLOUR in the
same manner as for above.
(NTSC 4.43 COLOUR)
1. Receive a NTSC 4.43MHz COMPOSITE VIDEO signal from
the EXT terminal.
2. Make similar fine adjustment of 4.43 COLOUR in the same
manner as for above.