dr. Mercola SILVERSHIELD EMF Shielding Tent Owner's Manual

EMF Shielding Tent

Owner's Manual

Components Included

1 SILVERSHIELD EMF Tent
1 Grounding Wire
1 Outlet Ground Tester
1 Carrying Case
1 Black Anti-Oxidizing Storage Bag
1 Six Foot Repair Thread
Welcome
Thank you for purchasing Dr. Mercola's SILVERSHIELD EMF Shielding
Tent. This tent uses SILVERSHIELD silver and nylon material knitted for
tight continuity between the threads. This tent is designed to protect
from EMFs emitted through all types of electronic devices. Using this
EMF Shielding Tent will help block harmful EMFs.
Features and Benefits
• Easy to use
• Folds for easy travel
• Reduces EMFs
Specifications
Model Dr. Mercola SILVERSHIELD EMF Shielding Tent
Material Composition
Silver and nylon; Fiberglass tension rods
Unit Weight 4 lb (1.8 kg)
Dimensions (W x D x H) 86 in (218 cm) x 36 in (92 cm) x 24 in (60 cm)
Capacity
1 Adult Person

Important Safeguards

WARNING:
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
• This tent is not intended for outdoor conditions. Do not use the tent
for recreational camping.
• The elastic strap can cause a strangulation hazard.
• Intended for individual adult use only. Not intended for use with children.
CAUTION: Tent is constructed with tension rods. Tent will pop open
suddenly when strap is removed. To avoid harm, make sure area is
clear of people, pets, fire and objects when opening the tent.
Excessive tension to the rods could cause breakage and personal harm.

Grounding your SILVERSHIELD EMF Tent

•
In order to ground your SILVERSHIELD EMF Tent, you must connect it to the
ground port of a properly grounded 3 prong outlet. Check that your outlet
is grounded correctly by using the Outlet Ground Tester. (see Fig 1)
•
Two Amber Lights illuminated on the tester is CORRECT and means that you
have a proper ground. You're ready to connect your tent.
•
Any other light combinations mean your outlet is NOT properly grounded.
Try testing another outlet.

Connecting your SILVERSHIELD EMF Tent

•
Snap the Ground Connector onto the Tent's connection tab and insert the
Ground Plug into the ground port of the wall outlet. (see Fig 2)
Outlet Ground
Tester
OFF ON ON
Correct Light
Configuration
Figure 1
Ground Ground
Plug Connector
Grounding
Wire
Connection
Tab
Figure 2