Advertisement
the turbine.
2.
Remove the old batteries and clean any corrosion from the terminals.
3.
Install new batteries. Make sure the positive post is in the correct position.
4.
When the batteries are replaced, the face plate will power ON. Check the display to ensure
normal functions have resumed before assembling again.
5.
Reseat batteries, if necessary, and position the faceplate on the turbine housing. To avoid
moisture damage, make sure the O-ring is fully seated. Tighten the four screws on the
faceplate.
SPECIFICATIONS
Model:
Unit of Measure:
Flowrate:
Working Pressure:
Operating Temperature: -10°C to +54°C
Storage Temperature: -40°C to +70°C
Threads:
Model:
Unit of Measure:
Flowrate:
Working Pressure:
Operating Temperature: -10°C to +54°C
Storage Temperature: -40°C to +70°C
Threads:
Great Plains Industries Australia, hereby provides a limited warranty against defects in material and
workman-ship on all products manufactured by Great Plains Industries, Inc. This product includes a 1
year warranty from date of purchase as evidenced by the original sales receipt. A 18 month warranty from
product date of manufacture will apply in cases where the original sales receipt is not available.
Reference product labeling for the warranty expiration date based on 18 months from date of
manufacture. Manufacturer's sole obligation under the foregoing warranties will be limited to either, at
Manufacturer's option, replacing or repairing defective Goods (subject to limitations hereinafter
provided) or refunding the purchase price for such Goods theretofore paid by the Buyer, and Buyer's
exclusive remedy for breach of any such warranties will be enforcement of such obligations of
Manufacturer. The warranty shall extend to the purchaser of this product and to any person to whom such
product is transferred during the warranty period.
This warranty shall not apply if:
A.
B.
To make a claim against this warranty, contact the your local FLOMEC distributor or GPI Australia
Customer Service Department at sales@gpiaustralia.com.au
GPI will step you through a product troubleshooting process to determine appropriate corrective actions.
GREAT PLAINS INDUSTRIES AUSTRALIA, EXCLUDES LIABILITY UNDER THIS WARRANTY FOR
DIRECT, INDIRECT, INCIDENTAL AND CONSEQUENTIAL DAMAGES INCURRED IN THE USE OR
LOSS OF USE OF THE PRODUCT WARRANTED HEREUNDER.
The company herewith expressly disclaims any warranty of merchantability or fitness for any particular
purpose other than for which it was designed.
GPI Australia also provides automatic guarantees of all goods according to Australian Consumer Law.
5/17
01N31LM
Litres
11 to 113 LPM
10.3 bar
1 inch NPT
01N12LM
Litres
11 to 113 LPM
10.3 bar
1 inch ISO7 ( BSPT)
Limited Warranty Policy
the product has been altered or modified outside the warrantor's duly appointed representative;
the product has been subjected to neglect, misuse, abuse or damage or has been installed
or operated other than in accordance with the manufacturer's operating instructions.
920900-02
Advertisement
