Classic Accessories Over Drive 5th Wheel Hitch Cover Instructions

Instructions: 5th Wheel Hitch Cover
WARNING!
When transporting in an open vehicle
be sure to use and tighten all the
straps—the cover could blow off and
cause injury to others.
CAUTION!
Failure to use and tighten all the
straps when transporting in an open
vehicle can cause damage to your
cover or vehicle.

Installation

1. Slip your cover over the top of your
5th Wheel Hitch aligning it with the
side pass-through opening for the
engagement-release handle.
2. Depending on the particular model
of your 5th Wheel Hitch, attach the
elastic cords with the four corner
metal hooks to the channeled rails of
the hitch base, and/or use the four
rip-and-grip straps and attach them
to the legs or frame of your hitch.
3. Adjust for a snug fit and secure the
cover bottom tightly to your hitch.
Be sure your cover is on tight so that
wind cannot blow it off.
80-101-011001-00 ∧ 80-116-010401-00
10 cR51_11643

Use and Storage

Never store a wet cover in a
confined area as the cover can be
damaged by mildew.

Care

Spot clean with water, a mild soap
and a sponge. Don't use abrasive
cleaners or brushes.
mild soap
no bleach
no tools
required
CLASSIC ACCESSORIES, INC.
KENT, WA USA 98032 ©2010
c l a s s i c a c c e s s o r i e s . c o m
line dry
do not iron
do not
pack wet