Summary of Contents for Cermate Technologies TN531D
Page 1
Technical Document Version 0.0 January, 2010 PLC Connection Guide TN531D BACNet/IP Driver Setting ◎Revision Record Revision Date Content Owner www.cermate.com...
Page 2
TND531-E0 Preface This tech note introduces how to connect BACNet/IP device with the PanelMaster HMI. When you wish to link with the BACNet/IP device, please follow below steps to use the CAS BACNet Explorer to search on-line device: (1) CAS BACNet Explorer setting Page 2 of 9 www.cermate.com...
Page 3
TND531-E0 (2) Apply the CAS BACNet Explorer tool Step 1: Press the “License” Step 2: Fill out one e-mail addres to apply the “Product Key” and it can be used for 60-minutes. If you need to use several times, you can use same e-mail account to apply it. Step 3: Press the ”Request a key”, it will enter its website and key-in the e-mail account to execute the “Apply”...
Page 4
TND531-E0 (3) BACNet/IP netwrok setting Step 1: Select the “Network” Step 2: Select the “BACnet IP” and “BACnet Ethernet” Step 3: Key-in the “BACNet IP Port” Step 4: To make sure the the PC and BACNet/IP device is linking, to press the “Refresh” button toget the on-line device.
Page 5
TND531-E0 (4) Press the ”Discover” button and select all device to press ”Send”. 指令功能碼:讀取命令碼 0x01/0x02/0x03/0x04 寫入命令碼 0x05/0x06/0x15/0x16 Page 5 of 9 www.cermate.com...
Page 6
TND531-E0 Sample: the object ID is ”9999” and this ID is the node address of the PM software setting. Note: The node address of the PM Designer software (Before Ver1.2.57) is 0~32767. Please setting the object ID to 0~32767. Device AV1=456.000 (Floating Point) Page 6 of 9 www.cermate.com...
Page 7
TND531-E0 HMI Settings: Select [Device/Server: Honeywell BACnet/IP Protocol] Setting HMI IP address to 192.168.1.34, and the Node Address=9999 (Object I.D.) Page 7 of 9 www.cermate.com...
Page 8
TND531-E0 Bit Device: Word Device: ~Thank You~ Page 8 of 9 www.cermate.com...