Sinfonia Technology EA-15B Quick Start Manual

Supplementary instructions Supplementary Supplementary Supplementary

1. 1. 1. 1. Mounting of the stroke detector

Mounting of the stroke detector
Mounting of the stroke detector Mounting of the stroke detector
●The stroke detector shall be mounted as shown in the
drawing. The detector is mounted on the leaf spring with
the detector-support which is supplied by us with an
additional expense. The list below shows you the size of
the detector-supports.
●The detector-support shall be mounted together with the
leaf springs on the base frame.
detector-support for the old model EA-15 or EA-20, you
can mount the detector on the moving frame with the leaf
spring mounting screw. The screw must be fastened
tightly or the stroke of the bowl might fluctuate.
●The cable of the detector should be fixed with the cable
clamp with some slack without contact against the other
body or shaking.
The sizes of the detector-supports
Applicable model
EA-15B
EA-20B
●The recommended stroke detector must be the proximity sensor head "EH-110" supplied by KEYENCE.
SINFONIA TECHNOLOGY CO.,LTD.
instructions for model EA instructions instructions
When you have a
Ｗ φＤ Ｌ１
16 7 45
19 9 50
for model EA- - - - 15B and EA for model EA for model EA 15B and EA- - - - 20B 15B and EA 15B and EA
Ｌ２
25
30
H3-200
20B 20B 20B
HTE302412 1/2