eutonomy euFIX D212 DIN Quick Start

Table of Contents

Download this manual

Eutonomy

Eutonomy - euFIX D212 DIN adapter

(with button)

SKU: EUT_EUFIXD212

Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.

Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may vio

distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in t

equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or ba

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the

Z-Wave ensures a reliable communication by reconﬁrming every message (two-way communication) and

every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not

in direct wireless range of the transmitter.

This device and every other certiﬁed Z-Wave device can be used together with any other certiﬁed Z-Wave

device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this

device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of

security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

The euFIX adapters bring more professionalism to your Smart Home.

By using this professional solution you are able to mount the FIBARO moduls at DIN rail TH35 and hide them cleverly

have the choice between two versions: with or without button.

The Eutonomy euFIX D212 is suitable for the FIBARO Dimmer 2 (FIBEFGD-212) and has two buttons.

Features:

Suitable for FIBARO FGD-212

http://manuals-backend.z-wave.info/make.php?lang=en&sku=EUT_EUFIXD212&cert=

30-09-2020 13:58

Pagina 1 van 3

Table of Contents

Do you have a question about the euFIX D212 DIN and is the answer not in the manual?

Page 1 By using this professional solution you are able to mount the FIBARO moduls at DIN rail TH35 and hide them cleverly have the choice between two versions: with or without button. The Eutonomy euFIX D212 is suitable for the FIBARO Dimmer 2 (FIBEFGD-212) and has two buttons. Features: Suitable for FIBARO FGD-212 http://manuals-backend.z-wave.info/make.php?lang=en&sku=EUT_EUFIXD212&cert=...
Page 2 30-09-2020 13:58 Version with button Power supply: 230V, 50/60Hz Prepare for Installation / Reset Please read the user manual before installing the product. In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset by performing an Exclusion operation as described below in the manual.
Page 3 30-09-2020 13:58 Exclusion — is the process of removing Z-Wave devices from the network. Association — is a control relationship between a controlling device and a controlled device. Wakeup Notiﬁcation — is a special wireless message issued by a Z-Wave device to announces that is able to co Node Information Frame —...

5906874103005