Applications Weigand Reader /EdZKhd/KE S BIO-RID Bio-RID the Biometric + Card Reader from smart-i, is very fast and efficient in all processing and communication functions, faster than any other Biometric + Card reader in its category, making it an ideal option for any organization with a fairly large or very large number of employees.
Page 4
d,E/ > ^W/&/ d/KE Hardware specification: Particulars Description 32 Bit RISC Arm Memory Upto Flash 8 MB Events/Transactions 1,00,000 No. of templates in sensor 1900/19000 UID/Card + Finger, UID/Card only ,Card + Finger Card Only Operation Modes Card & finger Sensor High Quality Scratch Resistance Optical Sensor.
5 Operation obile APK. 1. Open SmartADMIN APK on Android phone 2. Select Bluetooth connection mode from the following options 3. Allow SmartAdmin Apk to turn on the Bluetooth...
Page 7
4. Scan for the bluetooth Device and select the Device 5. Enter USERNAME : 11111 and PASSWORD: 12345 & Press Login. 6. Device display message Bluetooth connected and the window shown below is opened on apk.
Page 8
7. To add New user, click on User >> Add User . Now Add user .: Enter UID/Card number or click on scan option and Show card across reader. 8.Click on Advance and Select card type → UID/Card+Finger and Press Enroll. 9.
Network setting Sr. No. Network Setting Parameters Description IP Address Set IP address to device for TCP/IP communication Subnet Mask As per your network. Gateway As per your network. Local TCP Port For device indentification and communication Local UDP Port For device indentification and communication.
Page 10
6. Connection Details 12V DC Power Supply BIOMETRIC TCP/IP READER TAMP TAMP For Template management CAT5e / CAT6 FOR LAN COMMUNICATION Network Switch...
Page 11
Bio-RID Connector WIRE details PIN DESCRIPTION WIRE Power POWER + (12Vdc) POWER - BLACK PIN DESCRIPTION WIRE GREEN RS485 WHITE PIN DESCRIPTION WIRE BLUE ORANGE Ethernet GREY BROWN YELLOW BROWN PIN DESCRIPTION WIRE BLACK GREEN Weigand Reader WHITE BUZZER YELLOW...
Page 15
9. Mounting on Unit on Wall Pan head self threaded star (M3*10) screw in wall 30.0 mm 11.0 mm 11.0 mm 18.0 mm Pan head self threaded star (M3*10) screw in wall 30.0 mm 40.0 mm Pan head self threaded star (M3*10) screw in wall...
Page 16
Notch to Fit the Device Notch to Fit the Device Note. Place the Plate on Wall and Fit the Device with a Screw.
Page 19
At the PC, Click Start -> Run -> Type “command” and press ‘OK’. Step 2 Type “telnet ipaddress port" (The IP Address should reflect that of your Bio-RID unit) Note: - If unsuccessful, either “Connect failed will be displayed, please fo llow the above steps carefully and test the connection.
Admin Id and password. # Is it possible to connect Bio-rid as weigand reader then what will be to step follow-up? No Not possible to connect Bio-RID as weigand reader on Site...
Need help?
Do you have a question about the BIO-RID and is the answer not in the manual?
Questions and answers