Advertisement
Table of Contents
7740
Local Annunciator
Installation and Operation Manual
AES Corporation
285 Newbury Street
P/N 40-7740
Rev 2
Peabody, MA 01960-1315 USA
operate the equipment.
Tel (978) 535-7310 • Fax (978) 535-7313
June 10, 2021
www.aes-corp.com
Copyright 2021 All Rights Reserved
AES-IntelliNet is a registered trademark of AES Corporation
;sdkpfo pijfpfpodkspfosd
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for AES Corporation 7740
- Page 1 285 Newbury Street P/N 40-7740 Rev 2 Peabody, MA 01960-1315 USA operate the equipment. Tel (978) 535-7310 • Fax (978) 535-7313 June 10, 2021 www.aes-corp.com Copyright 2021 All Rights Reserved AES-IntelliNet is a registered trademark of AES Corporation ;sdkpfo pijfpfpodkspfosd...
- Page 2 Installation Instructions for details on how to install the product within the constraints of its UL Listing. The 7740 requires 21 – 30 Vdc, 65mA max. The input power must be sourced from a Listed UL 864 Fire Alarm Control Panel (FACP) with a compatible power output circuit or a Listed UL1481 Power Supply for fire protection.
- Page 3 Utilize a standard single gang mounting box. One gang space is required for each module to be installed. A standard cover plate is required to cover the assembly. 1. Label the legend sheet for the 7740. 2. Mount the box securely into the wall. 3. Connect conduit and/or pull wiring as required.
- Page 4 AES 7740 Supplemental Information: J1 Jumper Setting A jumper on J1 pins IS NOT required for operation The 7740 is shipped from the factory with NO jumper on J1 pins See 40-7740 - Installation and Operation Manual for complete...
Need help?
Do you have a question about the 7740 and is the answer not in the manual?
Questions and answers