Download Print this page
AOR DA5000 Quick Start Manual

AOR DA5000 Quick Start Manual

Discone aerial for professional applications 700mhz - 3ghz

Advertisement

Quick Links

®
DA5000 - discone aerial for professional applications 700MHz ~ 3GHz
The DA5000 is a professionally constructed 'compact'
discone aerial for the upper UHF frequency range of
700MHz to 3GHz (3,000MHz). The top section comprises
of 16 horizontal elements and the lower section has eight
radials mounted on a solid stub terminated in a N-type
socket
.
The construction is largely of brass (BsBM) accounting for its weight of
700g, it is finished in a military grey colour. The overall length from the top
elements to the N-socket is about 240mm with the overall top diameter being
82mm and each radial 100mm long.
Termination is via a N-socket which is housed within the stub-mast to keep
adverse weather out. Use of quality 50 OHM coaxial cable is essential, at
least URM67 / RG213 for short lengths and even better quality for longer
cable runs.
Avoid touching the horizontal elements, improper handling of the
horizontal elements will degrade the aerial's performance. Due to the
exacting method of construction, it is not possible to replace components
which are mishandled and accidentally damaged by the customer.
The DA5000 is supplied with an aluminium stub-mast of 32mm diameter and
400mm in length, clamps to secure the aerial / stub-mast / support pole
(support pole not included), 'V' brackets are also included which accept a
support pole of 25mm - 50mm diameter.
S
pecification
Frequency coverage
Aerial gain (max)
Impedance
Termination
Horizontal elements
Radials
Overall height
Wind resistance
Stub-mast
Support pole size
Coaxial cable
Supplied items
1 x DA5000 aerial
1 x stub-mast with large securing bolt and split washer
2 x support clamp with two small bolts
2 x 'V' brackets with four washers & nuts
1 x instruction manual
Note: measurements approx, not intended for transmit
700MHz - 3GHz (3,000MHz)
2.5dB (see plot) vertical omni-directional
50 OHM
N-socket, female
16, overall top diameter 82mm
8, 100mm long, overall outer diameter 145mm
240mm
up to 40m/S (theoretical)
32mm diameter, 400mm long
25mm - 50mm (not included)
Use low loss (not supplied)
®
AOR Ltd
2-6-4 Misuji, Taito-ku, Tokyo 111-0055, Japan.
Tel: +81 3 3865 1695 Fax: +81 3 3865 1697
post@aorja.com www.aorja.com
Autoryzowany Przedstawiciel AOR w Polsce:
INRADIO
ABEL & PRO-FIT
ul. Puszkina 80
92-516 £ódŸ
tel.
(+42) 649 28 28
e-mail:
biuro@inRADIO.pl
internet:
www.inRADIO.pl

Advertisement

loading

Summary of Contents for AOR DA5000

  • Page 1 The DA5000 is supplied with an aluminium stub-mast of 32mm diameter and 400mm in length, clamps to secure the aerial / stub-mast / support pole (support pole not included), 'V' brackets are also included which accept a support pole of 25mm - 50mm diameter.
  • Page 2 Do NOT touch the horizontal elements! Improper handling of the horizontal elements will degrade the aerial's performance. Assembly instructions 1. Connect the N connector 2. Insert the screw with washer (as shown) 3. Secure to stub-mast (included) and to mounting pole (not supplied)