Summary of Contents for UDO AUDIO Da Capo 75
- Page 1 Da Capo roesner acoustics cook book amps roesner ... just pure and real...
-
Page 2: Table Of Contents
amps roesner manual Spirit 1. Welcome page 2. Safety Instructions - dos and don’ts 3. Controls and Connections - Designation 3.1 Top Side 3.2 Back Side 4. Operation - How to get started 4.1 Above all - Check mains 4.1a Cable up properly 4.2 Gain Structure - Level Adjustment 5. -
Page 3: Welcome
character meets Welcome to my amps Technology amps. roesner and thank you for choosing The DaCapo 7 is a two channel combo amplifier made for music lovers, privates or professionals, that value tone and want their in- struments sound as they really do. In all my work in the field of acoustics and musical instruments over the last decades I have been striving to bridge the gap bet- ween what we wish for as „natural sound“... -
Page 4: Safety Instructions - Dos And Don'ts
2. Safety Instructions - dos and don‘ts RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with the arrow head symbol within an ATTENTION The exclamation point within an equilateral triangle is equilateral triangle is intended to alert the user to the CAUTION intended to alert the user to the presence of important presence of uninsolated „dangerous voltage“... - Page 5 PEUT ÊTRE CHAUD EN OPERATION NIVEAU SONORE ÉLEVÉ ATTENTION ATTENTION Heat radiation waves rising above a surface in an The sound waves associated with an auricle in an CAUTION CAUTION equilateral triangle are intended to warn the user equilateral triangle are intended to warn the user that the surface of the device may become hot that the device can reproduce high sound pressu- HIGH SOUNDPRESSURE LEVEL...
-
Page 6: Controls And Connections - Designation
3. Controls and Connections - Designation 3.1 Top Side input 1 gain bass middle treble input 2 gain bass middle treble master level line line clip tone clip preset channel 1 channel 2 input: signal input -> TRS 6,3 mm jack plug or XLR-connector hpf: high pass filter adjustment, 40 Hz to 350 Hz (combi-socket) -
Page 7: Back Side
3.2 Back Side D� C�p� phones: headphone signal output, stereo switch: footswitch connecting socket, TRS 6.3mm jack-socket roesner acoustics efx send: signal output to external effect efx return: signal input from external effect line 2: line signal output, high level e.g. mixing console aux in phones... -
Page 8: Operation - How To Get Started
4. Operation - How to get started Make sure all gains, levels and the master control are in zero- (left stop) and the tone controls in center-position. You may now switch the device on. The power switch on the backside is illuminating in 4.1 Above All - Check your local mains! red. - Page 9 to your application (microphone, pickup, lines source) and turn the band tone controls in each channel. Bass and treble are laid out as gain control clockwise until the clip indicator flashes momentarily shelving filters. The design reflects the ranges of instrument and while playing with a strong attack.
-
Page 10: Effect
It is an essential tool to handle e.g. the Furthermore an additional effect device may be connected to DaCapo 7 proximity effect in microphone operati- via efx send-return effects loop on the back- high pass filter - mode of operation gain in dB The proximity effect denominates... -
Page 11: Phones
5.5 phones 5.9 DI ch 1, DI ch 2 This output allows a stereo headphone to be connected. When The device offers two equally leveled electronically balanced DI- connected the speaker is muted and master control sets the over- outs to make the individual channel preamp signals available. This all volume. -
Page 12: Technical Data
6. Technical Data Please note: Use TRS (Stereo Jacks) only. Does not work with mono jacks! INPUTS: When plugged in, internal speaker is muted! => channel 1 and 2 => send: jack socket, unbalanced, ¼” (6.35 mm), pre master, switchable instrument or microphone input as combi-socket, XLR + jack ¼” output voltage: 1.4 V (+3 dBV) (6.35 mm) and clip indicators, min. - Page 13 => Notes channel 2: hpf filter: 40Hz to 350 Hz, _____________________________________________________ bass: 8 dB at 100 Hz (shelf type) middle: 6 dB at 800 Hz _____________________________________________________ treble: 8 dB at 10 kHz (shelf type) _____________________________________________________ EFFECTS _____________________________________________________ effect presets: 1: reverb short, 2: reverb long, 3: chorus, 4: custom delay, 5: my delay, 6: tap n’...
-
Page 14: Jumper Position
7. Jumper positions JUMPER SETTINGS: => => direct out attenuation: JP9: DI ch 1 pre or post EQ. default: pre JP 1: line ch1 -> high (+9.5dB) low (0dB). default: high JP10: DI ch2 pre or post EQ. default: pre JP 2: line ch2->... -
Page 15: Blockdiagram
8. Block diagram Da Capo 7 190626 Block Diagram V-1 roesner Sheet: 1/1 acoustics... - Page 16 roesner acoustics udo roesner amps are designed and developed in Germany and France by udo roesner and MARco-labs. Produced in Indonesia with pleasure and great care. MARco-labs s.a.s. amps roesner www.udo-amps.com ML_DMA-DC75-UK-200417...