monolith extra Installation Manual page 12

monolith EXTRA
7 Aligning the side sections
8 Aligning the top plate holder
9 a) Fitting the top plate
12
All manuals and user guides at all-guides.com
Using a spirit level, check that the upper
edge of the side elements is at the same
height as the top of the steel casing.
Adjust the top plate screws until there is
a 2 cm gap between screw and top edge
of stone element.
Now carefully place the top plate onto
the screws.
English
Ensure that you do not scratch
the carcass.
Ensure that you do not scratch
the stone.
Ensure that you do not scratch
the top plate during this oper-
ation.