Remove The Base Assembly For Vesa Mounting - Philips Brilliance 438P1 Manual

2. Setting up the Display
• Swap: The main picture source and
the sub picture source swapped on
the display.
Swap A and B source in [PIP] mode:
B
A
(main)
• Off: Stop MultiView function.
Inputs VGA HDMI1 HDMI2
VGA
MAIN
HDMI1
SOURCE
HDMI2
(xl)
DisplayPort1
DisplayPort2
Note
1. When you do the SWAP function, the
video and its audio source will swap at
the same time.
A
B
↔
(main)
SUB SOURCE
POSSIBILITY (xl)
DisplayPort1 DisplayPort2
2.4 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the display face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
2. Loosen the assembly screws, then
detach the bases from the display.
Note
This display accepts a 200mm x
200mm
VESA-Compliant mounting interface.
200mm
15
200mm