Porsche Cayman Owner's Manual page 251

Installing headlights
1. Attach plug (clearly audible clicking sound).
2. Insert headlight into the guide rails and push
fully into the wing.
3. Push headlight to the rear and at the same
time turn the socket wrench until it points
horizontally to the rear C.
You should feel and hear the headlight locking
mechanism engage.
4. Close the cover for the headlight release
mechanism.
5. Attach tool box.
6. Check function of all bulbs.
Changing bulbs for low beam/high beam
(Halogen headlights)
Information
Replacement of the low/high-beam bulbs of
TM
Bi-Xenon headlights involves a greater
amount of installation work.
f
Have defective bulbs replaced at an authorized
Porsche dealer.
Opening the cover of the headlight housing
1. Remove the headlight.
f
Please see the chapter "REMOVING
HEADLIGHTS" on page 248.
2. Remove the 4 screws A.
3. Fold up the housing cover and remove.
Changing bulb for low beam headlight
1. Disconnect plug B.
2. Press the fixing clip C downwards.
3. Replace defective bulb.
When doing so, ensure bulb is seated properly.
4. Press the fixing clip C upwards.
5. Connect the plug B.
6. Fit the housing cover at the tabs and install the
4 screws A.
7. Install the headlight and check operation of
bulb.
f
Please see the chapter "INSTALLING
HEADLIGHTS" on page 249.
Minor Repairs
249