Ozito PXC PXSBK-418 Instruction Manual

Ozito PXC PXSBK-418 Instruction Manual

Surface brush

Advertisement

Quick Links

SURFACE
BRUSH
INSTRUCTION MANUAL
SPECIFICATIONS
Input:
18V
No Load Speed:
800-1,400/min
Brush Diameter Max.:
115mm
Working Width Max.:
215mm
Max. Inlet Pressure:
87 psi (6 bar)
Max. Water Inlet Temp.: 35°C
Noise Rating:
94.6dB (A)
IP Rating:
IPX0
Tool Weight:
4.1kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way
• Professional, industrial or high frequency use.
OZITO
Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: and included
accessories.
STANDARD EQUIPMENT
Surface Brush
Additional Handle
Medium 2-Piece Nylon Brush
Soft 2-Piece Nylon Brush & Cover
OPEN
CLOSED
Hose Clip, Water Control Valve
PXSBS-018
0321

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXC PXSBK-418 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ozito PXC PXSBK-418

  • Page 1 IP Rating: IPX0 Tool Weight: 4.1kg OPEN CLOSED ozito.com.au Hose Clip, Water Control Valve PXSBS-018 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    BATTERY & CHARGER 2. To change the working height, extended the Telescopic Shaft This tool is compatible with all battery and chargers from the Ozito to the desired height and then Power X Change Range. retighten the Lock Nut by turning it clockwise.
  • Page 3 2. CLEANING BRUSHES • Ultra Metal Brush (accessory) WARNING!: THE SURFACES MUST BE SUITABLE FOR CLEANING USING ROTATING BRUSHES. FOR WET This brush can be used for cleaning robust surfaces such as, e.g. paving CLEANING THE SURFACES MUST ALSO BE INSENSITIVE stones/ concrete blocks, concreted surfaces, granite or porphyry to remove TO WATER.
  • Page 4: Water Control Valve

    3. PREPARATION Water Inlet Connector 4. Attach the brush covers back in 5. The Soft Nylon Brush place. The wider brush cover is (yellow/green) and the Ultra used with the Medium Nylon Metal Brush is fitted the WARNING!: ENSURE BOTH THE WATER SUPPLY Brush with the side brush.
  • Page 5: Operation

    OPERATION 4. CONTROLS Inserting & Removing the Battery Direction Lever Using the Direction Lever you can select the direction of rotation of the 1. Align the ribs of the battery with cleaning brush and lock it so that it cannot be switched on accidentally. You the battery mount and slide in can select between forward and reverse rotation.
  • Page 6: Overload Protection

    OPERATION (cont.) 5. USING THE SURFACE BRUSH Brushing Artificial Turf WARNING!: THE BRUSH COVERS ON THE SIDE MUST BE FITTED SECURELY BEFORE 1. Place the Soft Nylon Brush evenly on the surface. USE. 2. Set the working height to the one which is most comfortable for you (see WARNING! ENSURE THAT YOU HAVE FITTED Adjusting the Working Height).
  • Page 7: Maintenance

    Power tools that are no longer usable should not be disposed of with household waste Note: Ozito Industries will not be responsible for any damage or injuries caused but in an environmentally friendly way. Please recycle where facilities exist. Check by the repair of the Surface Brush by an unauthorised person or by mishandling of with your local council authority for recycling advice.
  • Page 8: Electrical Safety

    ELECTRICAL SAFETY WARNING! Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data. When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
  • Page 9 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change PXBP-400 rechargeable batteries with an Ozito Power X Change Charger.
  • Page 10 Australia 1800 069 486 tool) for the battery to reach its optimum performance / runtime. This battery is compatible with chargers from the 18V Ozito Power X Change range New Zealand 0508 069 486 available through your local Bunnings Warehouse. Product availability may differ.
  • Page 11 21. Keep the battery charger, batteries and the cordless tool out of children’s reach. 22. Do not use damaged battery chargers. 23. Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change rechargeable batteries with an Ozito Power X Change Charger.
  • Page 12 The correct dimensions for drill holes can be found on the back of the charging unit; a • If the tool shows signs of damage or defects caused by or resulting from template for the mounting hole locations can also be found on the Ozito website. abuse, accidents or alterations.

This manual is also suitable for:

Pxsbs-018

Table of Contents