Connecting The Usb Receiver - Dvico Fusion Remote User Manual

4) Click on the "OK" to restart and finish installation.

2. Connecting the USB Receiver

1) Connect the IR receiver module to the PC's USB port.
2) After IR receiver and Fusion remote software is
installed, please reboot and start the configuration
by right clicking the Fusion Remote icon at the low
right bottom of the screen.
3) Please select the port that IR receiver module is attached and press the any button on the remote
transceiver. A Dialog box with the remote transceiver buttons will appear.
All specifications and information are subject to changes without further notices 3