LG SP11RA Simple Manual

SIMPLE MANUAL
Wi-Fi
SOUND BAR
SP11RA
(SPP11M-SL, SPP11M-SR)
MFL71785854
2104_Rev01 Copyright © 2021 LG Electronics Inc. All Rights Reserved.
SP11RA.DAUSLLM_SIMPLE (Sheet)_MFL71785854.indd 1-3
OPTICAL HDMI IN HDMI IN
(ARC)
OUT
a a
OPTICAL HDMI OUT HDMI IN HDMI IN
IN (1) (2)
(TV eARC/ARC)
b
D
Replacement of Battery
www.lg.com
C
A
B
c
c
E
HDMI OUT
Installing and Using the Product
ENGLISH
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner' s Manual. Some of the content in this manual may differ from your product.
A Sound bar D Wireless Subwoofer - Install it close to the sound bar.
B Remote Control Receiver / Status Display E External Device - (Blu-ray player, game console, etc.)
C Wireless Rear Speakers
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
c Connect to power in the following order: wireless subwoofer [ wireless rear speakers [ sound bar. Then, turn on the sound
bar. When the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and wireless rear
speakers will light up in green.
d Using the product with your TV
A Press the Function button repeatedly until "OPT/HDMI ARC" appears on the status display.
B On your TV' s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, "OPT", "ARC", or "E-ARC" will appear on the status display with a sound.
e Connecting the product to your smartphone via Wi-Fi
A Connect your smartphone to Wi-Fi.
B Install the LG Sound Bar app on Google Play or the App Store.
C Run the LG Sound Bar app and follow the instructions.
D The product will connect to your smartphone and you can control the product with LG Sound Bar app.
f Connecting the product to your smartphone via Bluetooth
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. (
On)
B Press the Bluetooth pair button. After a moment, you will see "BT READY" on the status display.
C Find and tap "LG_Speaker_SP11RA_XXXX" or the name you registered on the Google Home app.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change from "PAIRED" [
"Connected Bluetooth device name" [ "BT" .
If you see a red LED on the back of the wireless subwoofer or wireless rear speakers, it means that the sound bar is not connected to the
speakers. If this is the case, connect them in the following order.
A Press the Power button on the sound bar to turn it off.
B Press the PAIRING (Pairing) button on the back of the disconnected wireless subwoofer or wireless rear speakers. Check if each LED blinks
green.
- If you still see a red LED on the back of the wireless subwoofer or wireless rear speakers, press and hold the button on the back of the
subwoofer or wireless rear speakers again.
C Press the Power button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the back of the wireless subwoofer or wireless rear speakers light up in
green.
Keep the sound bar, the subwoofer and wireless rear speakers away from the device (ex. wireless router, microwave oven, etc.) over 1 m to
prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
y Design and specifications are subject to change without notice.
y Google Play is a trademark of Google LLC.
Off >
2021-04-13 4:31:01