Dainolite DLHA102 Important Safety Instructions
  1. Manuals
  2. Brands
  3. Dainolite Manuals
  4. Home Lighting
  5. DLHA102
  6. Important safety instructions

Dainolite DLHA102 Important Safety Instructions

Hide thumbs
1
2

Advertisement

Available languages

Available languages

Table of Contents

WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV
RADIATION, OR INJURY TO PERSONS. Follow these instructions:
1.
Turn off / unplug and allow to cool before replacing bulb.
Lamp gets HOT quickly! Only contact switch / plug when turning on.
2.
3.
Do not touch hot lens, guard, or enclosure.
4.
Do not remain in light if skin feels warm.
5.
Do not look directly at lighted lamp.
6.
Keep lamp away from materials that may burn.
7.
Use only with 12V-50W bulb or smaller.
8.
Do not touch the bulb at any time. Use a soft cloth when doing so. Oil from skin
may damage bulb.
9.
Do not operate the lamp with a missing or damaged bulb cover.
1.
Disconnect the power for minimum 12 minutes. This will allow the bulb to cool.
2.
Pop out steel ring using any sharp tool. Insert at place of two gaps, then lift out the
glass shield.
3.
Remove bulb and insert new one. Avoid touching new bulb with fingers, use cloth
or tissue to handle it.
4.
Replace glass shield and insert the steel ring.
MODEL DLHA102
IMPORTANT SAFETY INSTRUCTIONS
LIGHTED LAMP IS HOT BE CAREFUL

HOW TO REPLACE BULB

February 1, 2003
May 30, 2007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLHA102 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dainolite DLHA102

Summary of Contents for Dainolite DLHA102

  • Page 1 MODEL DLHA102 IMPORTANT SAFETY INSTRUCTIONS LIGHTED LAMP IS HOT BE CAREFUL February 1, 2003 WARNING – To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY TO PERSONS. Follow these instructions: Turn off / unplug and allow to cool before replacing bulb.
  • Page 2 MODEL DLHA102 February 1, 2003 Attention Afin de réduire le risque de feu, d’électrocution, de brûlure excessive ou de blessure: Éteindre la lampe. Puis laisser l’ampoule refroidir. Attention! La lampe devient chaude rapidement. Seulement la toucher par l’ interrupteur ou la base quand vous désirez l’allumer.

Table of Contents