2-2.10 Ide Hard Disk And Cd-Rom Connector - Socket PGA370 User Manual

II.HARDWARE INSTALLATION

2-2.10 IDE Hard Disk and CD-ROM Connector

Connect your IDE devices to the onboard 40-pin IDE connectors marked as
IDE1 and IDE2.
It is suggested that you connect the IDE devices to your IDE cables as the
figure shown above. Each IDE channel, either Primary or Secondary, supports
two IDE devices which must be set differently to master mode and slave
mode.
(Refer to your hard disk and CD-ROM user's manual for detailed settings of
IDE master and slave mode.)
ILA USER'S MANUAL
2-8