Connecting the Power Cord
STEP2
Connect the power cord last, after all connections are
complete.
1. Connect the power cord to the AC IN terminal on
the rear of the server.
2. Connect the other end to an AC outlet.
Easy Setup
STEP3
Make the basic settings to start using the server.
1. Turn on the TV.
2. Switch the TV's input to the line connected to
the server.
3. Press
on the server.
Easy Setup starts.
Select [Start] to proceed.
4. Select the option to access music and movie
related date.
5. Set [Music Server function] to [On].
DHCP is set automatically.
When using a fixed IP address, refer to
"Changing the Server Settings" in the
Operating Instructions.
to AC outlet
Easy Setup
Easy Setup steps you through the basic setup.
You can manually change the configurations later in the Settings category.
- Date and Time Settings
- All Media Guide Settings
- Music Server Settings
Start
Easy Setup - Music Server Settings
Set the Music Server functions.
If you are not using select [Off].
On
AC IN
Server
Power cord
Finish
RETURN
3/4
Off
Return
RETURN