Video Settings - Sony HES-V1000 Operating Instructions Manual

Video Settings

The default settings are underlined.
Video Output Aspect Ratio
– For your best viewing pleasure, select the
aspect ratio that best matches your needs. For
BD-ROMs or discs with AVCHD files, the
[16:9] aspect ratio is chosen automatically by
the application.
Video Input 1
– Select the signal type for the LINE IN 1
jacks.
Cinema Conversion Mode
– Sets the video conversion method for 480p,
720p, or 1080i signals from the HDMI OUT
jack or the COMPONENT VIDEO OUT
jacks.
Output Resolution Priority
– Allows you to select output priority from the
HDMI or component jacks.
HDMI Resolution
– Select the signal type for the HDMI OUT
jack.
Note that you can make this setting only
when the connected TV is turned on, and that
some options may not be displayed if they are
unacceptable for the TV.
YCbCr/RGB(HDMI)
– Sets the color setting for video signals output
from the HDMI OUT jack. Select the setting
that matches the type of TV, monitor, or
projector to be connected.
112
16:9
– Select this when connecting a wide-screen TV.
Original
– Select this when connecting to a TV with a wide-mode function.
A wide-screen TV also displays 4:3 screen pictures in 16:9.
4:3
– Select this when connecting a 4:3 TV without a wide-mode function.
For picture configuration, see "TV Display Viewing Options" (page 147).
Hint
z
See also your TV manual for details about the wide mode function of a 4:3 TV.
Video
– Select this when connecting to the VIDEO jack.
S Video
– Select this when connecting to the S VIDEO jack.
Auto
– Normally select this. The server automatically detects whether the material is video-
based or film-based, and switches to the appropriate conversion method.
Video
– The conversion method suited for video-based material will always be selected
regardless of the material.
HDMI
– Outputs signals according to the [HDMI Resolution] setting below.
Component
– The type of output signal is affected by certain factors. See page 113. When this is
selected, [HDMI Resolution] will be set to [Auto].
Auto
– Normally select this, or automatically fixed if the above [Output Resolution Priority]
is set to [Component].
The server outputs signals starting from the highest resolution acceptable to the TV;
1080p > 1080i > 720p > 480p
If the resulting image format is undesirable, try another setting that suits the TV.
480p
– Outputs 480p video signals.
1080i
– Outputs 1080i video signals.
720p
– Outputs 720p video signals.
1080p
– Outputs 1080p video signals.
Auto
– Automatically detects the type of external device, and switches to the matching color
setting.
RGB
– Outputs RGB video signals.
YCbCr 4:4:4
– Outputs YCbCr 4:4:4 video signals.
YCbCr 4:2:2
– Outputs YCbCr 4:2:2 video signals.
Settings
Video Output Aspect Ratio 16:9
Video Input 1 Video
Cinema Conversion Mode Auto
Output Resolution Priority Component
HDMI Resolution Auto