Subscribe to Our Youtube Channel
Summary of Contents for T.I.P. GROOM-IT
- Page 1 1619 COUNTY K CUSTER, WI 54423 PHONE 715-592-4650 · FAX 715-592-5063 E-Mail · tip@tipinc.net www.tipinc.net PULL-TYPE BRUSH SYSTEM WITH OPTIONS OPERATOR’S INSTRUCTIONS AND PARTS MANUAL...
-
Page 2: Table Of Contents
You can rest assured that you have one of the highest quality turf brush systems on the market today. With proper care and maintenance, your Groom-It will provide you with years of reliable service. If you have any questions about the Groom-It, or any of our other turf care products, feel free to call us or drop us a line. -
Page 3: Limited Warranty
Groom It =T.I.P. Inc.= Limited Warranty T.I.P. Inc. warrants that the equipment it manufactures will be free from defects in materials and workmanship for a period of one year from delivery date. This warranty is extended to the Original Purchaser only, and is non-transferrable. Should a defect in materials or workmanship be experienced within the warranty period, T.I.P. -
Page 4: Safety
UNDERSTAND AND FOLLOW SAFETY INFORMATION ALL OPERATORS should read and understand all safety information and operating instructions for the Groom-It, and learn how to use the controls properly. Be aware of safety words such as CAUTION, WARNING and DANGER. These words alert you to important safety information. - Page 5 Properly dispose of all waste materials. TRANSPORTATION The Groom-It is designed for off road use only, and should not be towed on public roadways. Maximum tow speed for machine is 15mph. If it becomes necessary to tow...
-
Page 6: Set-Up
GROOM-IT Brush System ASSEMBLY If your Groom-It came delivered on a pallet, first remove machine and all parts from the pallet. Connect the wishbone draw bar hitch assembly to the top frame of the machine using the two 3/4 x 3 inch bolts, washers and lock nuts provided. Place bolt through the frame upright, the washer, and finally the hitch assembly. -
Page 7: Operation Instructions
4 to 6 mph. When not brushing, raise Groom-It off of the ground. The hitch may be "Flipped" over, making it possible to pull the Groom-It in the opposite direction. This feature is to help minimize any "Set" the brushes might take being pulled in one direction, thus lengthening brush life. -
Page 8: Storage
Always store the Groom-It with the wheels lowered completely and the brushes off the ground. Use the Quick Set hitch to keep the Groom-It level, so brushes don't rest on the ground. To uncouple brush from tow vehicle, remove pin from hitch receiver, lower parking jack. -
Page 9: Groom-It Plus Option
(wheels raised all the way up), align the Groom-It Plus wings so they are centered on the ends of the Groom-It and tight to it. The quick release mounting tabs on the Groom-It Plus should be on top of the Groom It frame. Drill 4 holes through the mounting tab holes and though the Groom-It frame. - Page 10 Groom-It Plus wings in horizontal position. STORAGE/TRANSPORTATION The Groom-It Plus should always be pinned in the vertical position when being stored or transported from one location to another. Before storing the Groom-It Plus, clean all dirt and residue from the machine, especially the brushes.
- Page 11 FN37039 ¾" Nylock Nut FN13213 ½ x 2-1/2" Bolt FN37030 ½" Nylock Nut FN36310 ½" Nut BLK2XG05 Linear Actuator, 12V Electric SP100 Groom-It Decal MB230246 Polypropylene Brush, 24" Black for Natural Turf MB230186 Polypropylene Brush, 18" Black for Natural Turf...
- Page 12 Groom It Figure 2: Hitch, Electrical Part# Description GITBUCKLE Turnbuckle Leveling Adjuster Assy. FN66117 Clevis Pin, ½ x 2- ¼ " FN45281 Hitch Pin Clip for Clevis Pin TP921170 Joystick TP921170-B Extension Wire for Controller RH82301 Stabilizer Jack 3/8” x 5/8” Jack Attachment Bolt FN13102 3/8”...
- Page 13 Groom It Figure 3: Wheel Assembly Part# Description FN65126 Cotter Pin FN33092 ¾" Flat Washer TP4017A Axle, Zinc Plated TOSC-12 Set Collar, ¾" TP4025 Tire/Wheel Assy TP4026 Replacement Bushing for Wheel Assy MAINTENANCE: Grease each wheel daily and check tire pressure. To change tire, block up unit;...
- Page 14 Groom It Figure 4: Frame (Groom-It-Plus Option) Part# Description FN22159 Short Lag Screw FN22167 Long Lag Screw FN33004 Flat Washer for Lag Screws FN26367 Shoulder Screw FN13365 3/8 x 3" Bolt FN37024 3/8" Nylock Nut FN45282 Hitch Pin Clip #6 FN13005 ¼...
- Page 15 Clevis Pin 0.5 X 2.5 FN45281 Hitch Pin Clip #3 3/4 x 3.5” Bolt FN13367 3/4 x 3” Bolt FN13365 FN33018 3/4" Flat Washer FN37039 3/4" Nylock Nut TP3PTJACKSTAND Jack Stand for 3 PT Groom-It TP3PTTOPLINK 3 PT Top Link for 3 PT Groom-It...
- Page 16 Groom It MAIL THIS WARRANTY CARD TODAY IF IT IS NOT REGISTERED IN THE HOME OFFICE OF T.I.P. INC. ANY CLAIM YOU HAVE UNDER THE WARRANTY WILL NOT BE HONORED…. DON’T DELAY PLEASE COMPLETE THE WARRANY REGISTRATION AND RETURN IMMEDIATELY. CUT HERE T.I.P.
- Page 17 Groom It...
Need help?
Do you have a question about the GROOM-IT and is the answer not in the manual?
Questions and answers