Dukane ImagePro 8762 Appendix
Dukane ImagePro 8762 Appendix

Dukane ImagePro 8762 Appendix

Pin assignments of d-sub computer input connector
Hide thumbs Also See for ImagePro 8762:

Advertisement

Pin Assignments of D-Sub COMPUTER Input Connector
Mini D-Sub 15 Pin Connector
11
12
13
14
6
7
8
9
10
1
2
3
4
Signal Level
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
8762
Pin No.
15
5
10
11
12
13
14
15
RGB Signal (Analog)
1
Red
2
Green or Sync on Green
3
Blue
4
Ground
5
Ground
6
Red Ground
7
Green Ground
8
Blue Ground
9
No Connection
Sync Signal Ground
SCART Sync
Bi-directional DATA (SDA)
Horizontal Sync or Composite Sync
Vertical Sync
Data Clock
56
7. Appendix
YCbCr Signal
Cr
Y
Cb
Cr Ground
Y Ground
Cb Ground

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ImagePro 8762 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dukane ImagePro 8762

  • Page 1 Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level 8762 Pin No. RGB Signal (Analog) Green or Sync on Green Blue Ground Ground Red Ground Green Ground Blue Ground No Connection...
  • Page 2: Compatible Input Signal List

    Compatible Input Signal List Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) Vertical: 50 Hz to 85 Hz Signal Resolution ( Dots ) NTSC PAL60 SECAM VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 1024 VESA 1024 1024...
  • Page 3: Pc Control Codes And Cable Connection

    PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT VIDEO INPUT SELECT S-VIDEO PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF NOTE: Contact your local dealer for a full list of the PC Contorol Codes if needed. Cable Connection Communication Protocol Baud rate ...
  • Page 4: Troubleshooting Checklist

    Video and Audio No image is displayed from your PC or video equipment to the projector. Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’s signal output to the projector.
  • Page 5: Installation Environment

    In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Model number: Serial No.: Date of purchase: Lamp operating time (hours): Lamp Mode: Information on input signal: Horizontal synch frequency [...

Table of Contents