Customize To Ship Or Build Swap; Customize To Ship; Build Swap - Sony XPERIA ST25i Customization Manual

Customization Workflow
2.2

Customize to Ship or Build Swap

Is the unit a customized unit to be shipped?
Yes – proceed to 2.2.1 Customize to Ship
No – go to 2.2.2 Build Swap

2.2.1 Customize to Ship

2.2.1.1 Label Unit
Print two Core Unit labels by using 'LabelMake'.
Place one label on the phone as described in 1263-4086: Working Instructions – mechanical.
Place the second label on the Exchange Unit Box.
'LabelMake' instructions to be found on CSPN under 'LabelMake'!
2.2.1.2 Customize Mechanics
If necessary, apply the proper custom mechanical parts (co-branding, keyboard, etc.) for the variant
being created in accordance with the Cross Reference List by following the instructions of
1263-4086: Working Instructions – mechanical

2.2.2 Build Swap

2.2.2.1 Label Unit
Using a red marker, label the unit with the correct Exchange Unit number.
Refer to the Cross Reference List for the appropriate variant, which should be based on the non-
customizable mechanics of the unit.
2.2.2.2 De-Customize Unit
Remove any co-branding as described in 1263-4086: Working Instructions – mechanical
1263-4092 Rev 2
©
Sony Mobile Communications AB – Company Internal
Customization Repair Instruction Build Swap
6(7)