Enable keyboard password power-on function (JKB)
Note:
1. If using this function, 5VSB line of the power supply should be capable of
delivering enough current for all the devices connected to the keyboard
port, if not, you will be unable to power up the system using the keyboard.
2. If you set JKB as pin2 & pin3 closed, set "POWER ON Function" to "BUTTON
ONLY". Do not set it to Password, or you'll be unable to power up your
system by the keyboard or the power button.
3. If you encounter the above problems, clear CMOS and set the jumper and
BIOS option again.
N2en.p65
Manual for N2 series
15
Chapter 2
JKB
1
2
3
1
2
3
15
02-6-4, 16:53