Page 2
1. Structure name 1.1 STRUCTURE Wet well water tank Power light Temperature light Power cable Ball valve (Drain) Control Thermostat Safety control reset switch...
Page 3
2. Points for attention 2.1 Points for special attention 2.2 Safety device The temperature limiting control (max 105℃) can safeguard the " thermos tank " for suitable temperature. The control will cut out resulting in no heat being created. Tripping can occur if the water level falls too low or the base becomes covered with limescale.
Page 4
3 Operation instruction 3.1 Place the "bain marie" The "bain marie" should be placed on a solid level surface. The control thermostat of the "bain marie" should be in the minimum / off position. 3.2 Fill the empty "thermos tank" to the water-level. The Water-level of the “bain marie”...
Page 5
6. Specifications Model: BBM1 Size: Length 370mm Width 570mm Height 230mm Voltage: AC220V-240V 50-60HZ Material In/Out : Stainless Steel Leg support: Rubber 7 Installation instruction 7.1 The points for instruction before installation The place should be smooth and steady. Avoid the fall and leak of gas.
Page 6
Disposal EU regulations require products to be disposed of by specialist companies who remove or recycle products, including electronic, metal and plastic components. Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not obliged to dispose of commercial equipment but may be able to offer advice on how to dispose of the equipment locally.
Need help?
Do you have a question about the BBM1 and is the answer not in the manual?
Questions and answers