Summary of Contents for Bully Dog 153001
- Page 1 Stage 1 Shift Enhancer Applications Rapid Power Part # 153001 GM Duramax w/ auto trans ‘01-’05...
-
Page 2: Table Of Contents
TABle OF COnTenTS Get ready for greatly improved shift over stock shifting, this stage 1 shift enhancer will give you a noticeably better shift with a more positive engage. Before begining installation be sure that the truck has sat long enough for the INTRODUCTION ...pg. -
Page 3: Parts Included
Parts included: ThE SpRINgS: The two springs included with this kit will replace two of the stock springs that are in the trans- mission valve body. TRIm valvE a w/RIB: This trim valve will replace the stock vavle. Trim Valve A is unique, notice that it has a little rib in the center. -
Page 4: Removing Valve Body
removing Valve Body REmOvINg ThE TRANmISSION vALvE BODy Important: When dismantling the valve body be careful to store all of the parts in a safe place to prevent them from being lost. It is also very important to keep all the parts clean. 1. - Page 5 removing Valve Body 6. Remove the plate that secures the solenoids shown in picture #3. PICTURE 3 7. Remove all the remaining bolts that hold the valve body together and dismantle it. When separating the valve body pull evenly on each side being carefull not to break the attaching dowles. Do not use any pry bars or tools to separate the valve body.
-
Page 6: Changing Valves
1. Remove the A Trim solenoid and the 2 valves and 2 springs. 2. Replace the parts in the order shown in the Trim Valve Diagram using the Bully Dog A Trim valve. The A Trim valve is the valve with the rib. - Page 7 6.See the Separator Plate Drilling diagram to see where to drill out the two holes, then use the 1/8th drill bit that is included with the kit to drill out those two holes. SEPARATOR PLATE DRILLINg DIAgRAm 7. Finally reassemble the valve body and then install back onto the transmission. Torque the bolts that connect the valve body to the transmission to 8 ft/lbs.
- Page 8 Doc.# 153001-99 V1.0 Check out more of our AdrenAline PumPing products! Downloaders Intake Systems Triple Dog GT Exhaust Systems ® Free Technical Support at: 866-bullydog (866-285-5936) See More at: bullydog.com...
Need help?
Do you have a question about the 153001 and is the answer not in the manual?
Questions and answers